samurai EFI swap

[94Dodge Truggy]

Wondering if a 1987 Suzuki Samurai can be converted easily to EFI from a 1993 Samurai with all the parts? Or should I just go propane.

[hardluck]

definatly go propane. you need the gas tank for the in tank pump distributor and sensors and comp to go efi.

[94Dodge Truggy]

I have all of that on another samurai

[Nuts]

If you have the EFI intake,and don't mind messing with a few wires its not to bad.There is a speed sensor in the instument cluster thats a good idea to have but it'll work without it,lol.

[94Dodge Truggy]

What purpose is the speed sensor? For odometer or?

[Nuts]

It runs off the speedo cable,and I think it just adjusts the air/fuel mixture at highway speeds,might let everything run more efficiant too on a closed loop.I had a 90 with no speedo cable and it ran just fine,so you could do without it if you wanted.

[94Dodge Truggy]

So all the wires I need to splice will be in the same carbeurated harness?

[Nuts]

It'd probably be easier just to swich the entire EFI harness to the carbed body.There isn't much to them,all the plugs for the lights should be the same,and each one can only go to where its meant to.

[tinbeater]

It runs off the speedo cable,and I think it just adjusts the air/fuel mixture at highway speeds,might let everything run more efficiant too on a closed loop.I had a 90 with no speedo cable and it ran just fine,so you could do without it if you wanted.

Same here on my 91 efi. no speedo. I went to a propane setup from the efi. because of ecm. issues and I lost some upper end power.:confused: Thinking really hard on selling the propane set up and going back to pump gas.

[tinbeater]

If you have the EFI intake,and don't mind messing with a few wires its not to bad.There is a speed sensor in the instument cluster thats a good idea to have but it'll work without it,lol.

Hey Snut, I thought the vss. was only in the 16v.? but I could be wrong.:D

[Nuts]

Nope, the EFI sammies have one too even though its pretty much useless,lol. The Sammy fuel injection isn't as picky,or complicated as most,and will run fine without parts that other systems would need.

[94Dodge Truggy]

Same here on my 91 efi. no speedo. I went to a propane setup from the efi. because of ecm. issues and I lost some upper end power.:confused: Thinking really hard on selling the propane set up and going back to pump gas.

Wanna trade? I would like propane and I have a 93 samurai running but nocking with efi.

[tinbeater]

Wanna trade? I would like propane and I have a 93 samurai running but nocking with efi.

I have all the stuff to swap back to efi. I did a 1.6 swap a few years ago.;)
But you can pull all of the 1.3 efi. stuff and sell it on ebay, it seems to bring pretty good money.

[Nuts]

I have all the stuff to swap back to efi. I did a 1.6 swap a few years ago.;)
But you can pull all of the 1.3 efi. stuff and sell it on ebay, it seems to bring pretty good money.
I sold all my 1.3 EFI stuff for $500 on Izook about 4 years ago,I'm sure you could get that or more now.

[94Dodge Truggy]

Maybe I will sell the 93 samurai with the nocking motor for 700.00 for a quick sale.

[tinbeater]

Maybe I will sell the 93 samurai with the nocking motor for 700.00 for a quick sale.

Hey Scott. I may be interested? What shape is it in? Can you send me some pics?

[fabricator]

greg,
you can see it quicker
if we went there
scott and pic's in the same sentence is a funny

[94Dodge Truggy]

It is fairly rough. Frame is good and floor is good but tree and rock rash on panels and windshield. I will try to post up pics this weekend. I have not taken pictures of them yet.

[67fastback]

It is fairly rough. Frame is good and floor is good but tree and rock rash on panels and windshield. I will try to post up pics this weekend. I have not taken pictures of them yet.

lifted or anything or is it stock? title?

[94Dodge Truggy]

spring over and title.