View Full Version : YJ wiper motor stop
94Dodge Truggy
10-08-2009, 10:31 PM
My YJ's wipers run fine but seem to stop in the middle of the windshield. It is rather annoying as they are directly in my line of sight. Thinking the motor has issues and the switch is inside. Linkage is good and tight. What do ya think? :confused:
Hope Springs Hauler
10-09-2009, 12:15 AM
Does it matter if the wipers are on delay, low or high speed? Could be a timer fault
jmb8813
10-09-2009, 01:22 AM
i thought if they did that it had to do with the switch
94Dodge Truggy
10-09-2009, 07:46 AM
Let me see tonight but I believe it does it on any setting.
Flxratd
10-09-2009, 10:10 AM
could the linksge be installed out of phase ? does it actually park or does it stop where you turn them off ?
94Dodge Truggy
10-09-2009, 10:50 AM
I need to look at them closer but I do know that when they turn off they are stopped in the middle of the wiper stroke which puts them directly vertical.
Flxratd
10-09-2009, 11:18 AM
take the linkage off at the motor and the rotate the wipers to your desired position and then reattach at the motor. sounds like someone installed out of phase
jmb8813
10-09-2009, 12:29 PM
makes sense
94Dodge Truggy
10-09-2009, 12:39 PM
That would be too simple though. I wondered if that would make the wipers run too far in one direction but after looking at the linkage setup I think you have something. ;)
Flxratd
10-09-2009, 02:44 PM
thanks im not a mechanic i just play one on tv :D
tjjeepjeep
10-09-2009, 03:29 PM
thanks im not a mechanic i just play one on tv :D
That explains alot...
mike shelton
10-09-2009, 03:35 PM
wiper motor park is out.. replace the motor. mike
94Dodge Truggy
10-09-2009, 04:25 PM
the motor just broke off the window and is dangling by the wires. Is this good? :o
Hope Springs Hauler
10-09-2009, 04:29 PM
It think you found it:rolleyes:
BiggDaddy
10-12-2009, 10:14 PM
You could always just move your seats toward the center console. Then you could see better. It can't be as simple as the other stuff.
BiggDaddy
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.