Got me some new goodies for the yota axle build

[67fastback]

well I found some hi steer arms which turned out to be part of a marlincrawler kit for my 85 yota axles.:thumbup:

now saving up for the locker and dirty 30's or boblongs....
also has anyone used the 25mm mc kingpin upgrade on there yota's? not sure if that should be in the works for my upgrade or not...

[8UP]

I have an ARB air locker for a Toyota that I'll be taking to the local swap meet in a couple of weeks. It works perfect, has the usual marks on the case where the pinion scraped it, common on Toyota's, doesn't hurt anything. I replaced it when I went to the V-6 third member.
I'm going to price it at $400 at the swap meet, I'll take $350 for it if someone buy's it before then. Firm on the price, less than half the cost of a new one.

[67fastback]

I have an ARB air locker for a Toyota that I'll be taking to the local swap meet in a couple of weeks. It works perfect, has the usual marks on the case where the pinion scraped it, common on Toyota's, doesn't hurt anything. I replaced it when I went to the V-6 third member.
I'm going to price it at $400 at the swap meet, I'll take $350 for it if someone buy's it before then. Firm on the price, less than half the cost of a new one.

hmm have to think on that one..
got me another goodie for the swap the other day from the junk yard..
89-95 4 runner rear d shaft
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/197606_208249832534046_100000470923305_841702_1873 289_n.jpg
tcase end 42 degrees bend at the u-joint.
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/200789_208249902534039_100000470923305_841703_4243 104_n.jpg

[67fastback]

What size tires? I wouldn't bother with the kingpin upgrade until you get to
39's. If you pass on the arb get an aussie locker with a solid pinion sleeve.



well i have to find some 16 rims for my 9.50x16 ag tires...
then pick up some 37 in tires and rims for rock crawling..:thumbup:

[67fastback]

parts so far
front 85 axle with 4.56 gears
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/208478_210250369000659_100000470923305_856272_7054 235_n.jpg
rear 85 axles with 4.56 gears.
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/197194_210248935667469_100000470923305_856261_3463 031_n.jpg

Marlin hi steer arms and drag link and pitman bars
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/195890_210249379000758_100000470923305_856266_5161 76_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/199220_210249292334100_100000470923305_856264_7278 537_n.jpg
4 cyc pig with locker
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/205640_210240915668271_100000470923305_856073_6210 630_n.jpg
detroit locker for the front :lol:
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196959_210240502334979_100000470923305_856066_2410 747_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/188421_210240399001656_100000470923305_856064_6932 543_n.jpg

[Nuts]

Who told you 4;56? I thought yotas were 4;30s and 4;88s???

[simpletoy]

Count the teeth for us to check on those 4.56s

[67fastback]

Who told you 4;56? I thought yotas were 4;30s and 4;88s???


dot on end of pinion.. yellow

Code:
Ratio Ring/Pinion Color Crawl:Ratio
3.42 ...42/12... Purple ...31:1
3.90 ...39/10... Red... ...36:1
4.10 ...41/10... Pink.. ...37:1
4.11 ...37/09... Orange ...37:1
4.30 ...43/10... Blue.. ...39:1
4.37 ...35/08... Green. ...40:1
4.56 ...41/09... Yellow ...41:1
4.88 ...39/08... White. ...44:1
5.29 ...37/07... None.. ...48:1
5.71 ...40/07... None.. ...51:1


they came out of 85 4cyc auto truck!

and yes i will count them for sure when the locker goes in it...

[67fastback]

Well I just finished up ording my new longfields and 5th bolt kit for the axles...budgeting this build to make them strong... flanges and some other little parts to still get before I start....:thumbup:

They will be in next week....FYI if you dont buy the new hub gear or flanges it will void the warrantyy on the axles... why you say... cus when the stock hub goes it normally will strip the splines on the axles...:eek:

[humpy]

Well I just finished up ording my new longfields and 5th bolt kit for the axles...budgeting this build to make them strong... flanges and some other little parts to still get before I start....:thumbup:

They will be in next week....FYI if you dont buy the new hub gear or flanges it will void the warrantyy on the axles... why you say... cus when the stock hub goes it normally will strip the splines on the axles...:eek:

def buy drive flanges...much stronger in my opinion...if you run lockouts and bobby hub gears you HAVE to buy the arp hub studs or your lockout will blow off...literally....i seen one bout take a guys knee cap out once

[67fastback]

def buy drive flanges...much stronger in my opinion...if you run lockouts and bobby hub gears you HAVE to buy the arp hub studs or your lockout will blow off...literally....i seen one bout take a guys knee cap out once

yeah going with the drive flanges...:thumbup:

[67fastback]

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/208510_215859358439760_100000470923305_905112_7500 332_n.jpg

guess what is in the box????

[67fastback]

Well i purchase some new goodie tonight...
drive flanges
3" spacers
ARP studs
backing eleminators
fj-80 end
and some ther little things...
can not wait till they get here...
Soon I will get the woman to rebuild these axles for me...:thumbup:

[67fastback]

Well i did some progress on the axles, cut off the old steering arm crap and the shocks, not sure if i need the hi riser on the front axle yet or not so i left that...
more goodies to show up thursday or friday from TG...:thumbup: then the real fun begins....
:beers:

[67fastback]

Trail-Gears parts came today so hope to get some good weather to work on the axles...:( darn rain... :thumbup: