U&K metal works cnc plasma services

[u&k metal works]

Hey folks I'm now taking orders for all of your bracket and tab needs as well as DIY beadlocks and much more send me pm with questions and prices

[gothodgie]

where are u located ?

[u&k metal works]

Bainbridge Ohio about 19 miles east of Hillsboro

Moderator Edit: Bainbridge OH, 45612

[u&k metal works]

DIY beadlocks $200 for plain rings $225 for special order H1 rock rings $100 for a set of four. Get them just in time for Christmas

[yellowjacket]

bump for a good guy.

ive had copperhead fab cnc products before and the kerf quality is nowhere near as smooth as u&k kerf.

when i find some uncut h1 wheels ill be lookin for some rock rings from you zach.

Sent from my LS670 using Tapatalk

[u&k metal works]

Some of the new work from the shop

[cheapthrills49]

Hey grilled cheese man, ;) do u have a program for H1 rings with 12 bolts or maybe half rounds

[u&k metal works]

I should if not I'll make one cheapthrill

[u&k metal works]

491049114912.
Some new stuff coming out of the shop

[carwash]

What tonnage is your break that makes your spring plates?

[u&k metal works]

I used a 20 ton press but have access to a 130 ton press what do you need bent??

[cheapthrills49]

this thread needs a bump also.....zac does great work for deals!!!!:eyedrop::eyedrop:



This is just some of the business I have done with him, well this is just what I have of his here now. I have also built 3 other trucks with his parts, tabs, and custom brackets i may need.......I have had him cut tabs/brackets for 2 buggys/jeeps another buddy of mine has built as well as just backhalfing another jeep last week.

he stays very busy and always comes through in the pinch, and is generaly always cheaper than any other tab co. out there and dont have to pay shipping and keep business local......well on that note its not so damn local lol but he works in mason and ships if you just cant work anything out.


check out the big CTO hunks of 1/4"........custom panhard brackets:beers:

[cheapthrills49]

Flat bottom link tabs

long flat bottom shock-c/o tab

wrap around shock-c/o tab........NOTICE THE OFFSET HOLE SO THE SHOCK BODY CLEARS!

short rad. Tabs...double sheer belt tabs

[cheapthrills49]

And dont forget your trick tic gussets!!!!!!!!!!!!!!!!!

[frankensteinxj]

Yo zach,
gonna need about 10 of those small trucker tabs for my link brackets and my panhard and whatever else they may get used on.
Also got a buddy that asked me if you could make a supersport SS emblem.
If you can cut an emblem like that out he needs it mto say SS GRILL,
He made a grill out of the front end of an el camino and needs a few emblems.
Let me know what youcan do, thanks bud. :beers:

[frankensteinxj]

heres a few things Ive gotten from U&K.

LIVE ACTION! I told him I wanted a live action 12x8 sign and this is what I got as well as some iron cross gussets and air shock tabs.
http://i1182.photobucket.com/albums/x450/frankensteinxj/IMG_20120403_155219.jpg

Weld on beadlocks.
http://i1182.photobucket.com/albums/x450/frankensteinxj/IMG_20120403_155224.jpg

installed.
http://i1182.photobucket.com/albums/x450/frankensteinxj/IMG_20120403_155238.jpg


Great work from a good local guy.
Support your local businesses :beers:

[JeepHD]

Zac, are you going to the swap meet. I need a bunch if gussets for my cage.

Josh

[u&k metal works]

Thanks for the feedback fellers and yep I'll be at the IOK swap meet selling my goods hope to see y'all there

[cheapthrills49]

Figure I'd give this thread a BIRTHDAY BUMP
HAPPY B-DAY ZAC !!!!!

U running any b-day specials and what's your plan for the fall swap meet @ IOK?

[u&k metal works]

Thanks for the bump I'll be at swap meet sat all day selling my wears hope to see y'all there

[rilynsdad]

Thanks for the bump I'll be at swap meet sat all day selling my wears hope to see y'all there

you all got t-shirts?

[u&k metal works]

Fresh out sorry

[frankensteinxj]

Ill be needing some tabs and misc crap while Im there to.

Bringin some decals?

I just sold my truck and the decal went with it. Your advertised in kentucky now :thumbup:

[u&k metal works]

Yep I'll have some decals

[cmartin]

Didnt know if you were still making parts?? Im building a new rig and will be needing tabs and maybe some other stuff. If so are you gonna be at iok swap meet this year too

[u&k metal works]

Yep it's true I'm still hard at it cutting parts I'm sorry to say I won't be making the journey to cleves this spring do to work but feel free to call or message me for whatever you may need I plan on attending the fall swap meet with all of my wears and some new products to show off thanks!

[Jonesy]

You have a fire extinguisher drawn up? Was wanting a few for me an buddies to mount the bottles a little safer. Drew up my own simple one. Mind giving me a quote for a weld together kit?

[onepieceatatime]

You have a fire extinguisher drawn up? Was wanting a few for me an buddies to mount the bottles a little safer. Drew up my own simple one. Mind giving me a quote for a weld together kit?
There's a guy on Hardline that sell that same thing for $25 with all the hardware.

[jeepmanjeff]

Do you have brackets for a Disc conversion kit for a Chevy Corporate 14 bolt?

Also looking for tabs for shackles install on custom bumper I am building. 1" thick and 1" diameter hole.

[u&k metal works]

Sorry for the delay folks I've moved and I am currently working on wiring my shop so I can get back to cutting and fabing some parts I'll keep you posted when I'm up and going full swing

[JasperJeep]

That Zack is a cutting machine. Ordered my battery box, quart and gallon carriers. Bad ass.

[GT MOTORSPORTS]

how clean accurate are the holes? I had some brackets cut from another place and the holes always need cleaned up with a drill.

[u&k metal works]

Holes are very accurate I check each part for QA before it leaves the shop if a hole needs cleaned up I do it before it goes out


Sent from my iPhone using Tapatalk