67fastback
11-22-2011, 08:47 PM
Well I first off will say was not my idea( thanks woodsrail).. Just had to make one..
I was wheeling Zuk Spook 11 and found that I lost my front wheel and where not spinning... tried to put the shifter in 4 low again and still nothing, try 4 hi and nothing.. so had to get pulled out and lost a window getting pulled around a tree..But now to the good stuff.
Some one said hey try the to pull the shifter out and see if it going into gear... well as we fumbled around to try and find something long enough to get down in the top of the t case to spin the little metal retainer ring.. I though it would be nice if there was a tool..to get this out!!!
Well woodrail just happened to have such a tool he made and worked soo good that I had to make one also...
so withe the shifter out I started to make one that would fit into the little slots and also be able to push down and turn all at the same time.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461981312830_100000470923305_1396952_216 697615_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461961312832_100000470923305_1396951_163 1804792_n.jpg
Here is what I came up with.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/320606_320461937979501_100000470923305_1396950_128 5511742_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461907979504_100000470923305_1396949_231 695332_n.jpg
slotted so the shifter will slide into the middle and 2 little screws to go down into the side slots.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461887979506_100000470923305_1396948_689 581267_n.jpg
Here it is fitting into the slots.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461867979508_100000470923305_1396947_185 3711817_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461797979515_100000470923305_1396945_146 2489879_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461841312844_100000470923305_1396946_363 938684_n.jpg
I think i got about 15 bucks in it and about an hour making it.
I was wheeling Zuk Spook 11 and found that I lost my front wheel and where not spinning... tried to put the shifter in 4 low again and still nothing, try 4 hi and nothing.. so had to get pulled out and lost a window getting pulled around a tree..But now to the good stuff.
Some one said hey try the to pull the shifter out and see if it going into gear... well as we fumbled around to try and find something long enough to get down in the top of the t case to spin the little metal retainer ring.. I though it would be nice if there was a tool..to get this out!!!
Well woodrail just happened to have such a tool he made and worked soo good that I had to make one also...
so withe the shifter out I started to make one that would fit into the little slots and also be able to push down and turn all at the same time.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461981312830_100000470923305_1396952_216 697615_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461961312832_100000470923305_1396951_163 1804792_n.jpg
Here is what I came up with.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/320606_320461937979501_100000470923305_1396950_128 5511742_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461907979504_100000470923305_1396949_231 695332_n.jpg
slotted so the shifter will slide into the middle and 2 little screws to go down into the side slots.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461887979506_100000470923305_1396948_689 581267_n.jpg
Here it is fitting into the slots.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461867979508_100000470923305_1396947_185 3711817_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461797979515_100000470923305_1396945_146 2489879_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320606_320461841312844_100000470923305_1396946_363 938684_n.jpg
I think i got about 15 bucks in it and about an hour making it.