splines twisted

[cmartin]

How much can a stock dana 44 shaft twist at the splines before it breaks? Had the rear tore down and noticed the splines are twisted about 1 spline width. Plan on running it but how much life does it have left? Im running 37x14 irocs

[carwash]

You're already on borrowed time...

[LP78CJ]

i bet it will be fine till it breaks :D

[frankensteinxj]

Make it your mission next time out to snap it!!!!

[yellowjacket]

put truck in reverse, goose it, and twist them back straight again...problem solved:thumbup:

[kyrel69]

time for a upgrade :thumbup:

[humpy]

Put it in opposite side! Will let it twist twice as far before it's a problem :evilgrin:

[biggin69]

put truck in reverse, goose it, and twist them back straight again...problem solved:thumbup:

I read somewhere on Pirate that this is how the do it in the south! South of the Ohio river that is!:evilgrin:

[twiztedzuki]

cant believe anything on pirate, bunch gay westcoast flatbillers!

[Coppertop]

Time for an alloy shaft upgrade.You know if you let it go till breaking,it will be at the worse possible time.Then the hassle of fishing out all the broken pieces.:sweatin:

Nick

[jlynch]

The way you drive it will last forever. smileypoke

[JeffK5]

The last time I knowingly ran a twist axle spline it cost me a Detroit locker...

[cmartin]

Thanks j. Ordered one off ebay. Doesnt seem worth breaking anything else. Even though it might get me the reason for tons. :thumbup: