C.O.R.E. FORUM
Page 2 of 2 1 2
Show 25 post(s) from this thread on one page

C.O.R.E. FORUM (https://www.cincyoffroad.com/forumOLDVB3/index.php)
-   General Discussions (https://www.cincyoffroad.com/forumOLDVB3/forumdisplay.php?f=17)
-   -   Oklahoma buggy build (https://www.cincyoffroad.com/forumOLDVB3/showthread.php?t=6084)

oklahomawelder 06-28-2011 10:56 PM
Quote:
Originally Posted by carwash (Post 52630)
Where's the ball valves?


Ball Valves???????

oklahomawelder 06-29-2011 02:18 PM
12 Attachment(s)
New pics I took today....

yellowjacket 06-29-2011 02:29 PM
Bling! Hey what's the bs on ur racelines, and how far away from artec arms are they? Maybe artec site tell me max bs... if I can fit I'm gonna go that rout

oklahomawelder 06-29-2011 02:48 PM
I will have to find out the BS... They are about 1.5-2" away from the arms...
They ARTEC stuff is VERY nice....and I really like the outcome of everything put together on the front end...

The 35 spline 4340 yukon shafts and superjoints really fill up the space between the C and knuckle..... You can see it in 1 of the pics.....

twiztedzuki 06-29-2011 05:06 PM
hope yukon axles hold up, alot people breakin them, think they sum kind chromoly from india or probly china. trusses look fawkin sweet!!!!

oklahomawelder 06-29-2011 05:30 PM
Quote:
Originally Posted by twiztedzuki (Post 52665)
hope yukon axles hold up, alot people breakin them, think they sum kind chromoly from india or probly china. trusses look fawkin sweet!!!!

I hope they do too.......:sweatin:

Thanks....

oklahomawelder 07-06-2011 06:10 PM
3 Attachment(s)
Top Radiator mount....

twiztedzuki 07-06-2011 06:55 PM
nice that looks slick!!

oklahomawelder 10-27-2011 08:40 PM
11 Attachment(s)
Made a little progress on the buggy today.

The driver side floor is complete. .125" 3003 aluminum

Going to work on the passenger side this weekend. The tube under the aluminum and the aluminum will both be removable to allow easy removal of the transmission and the atlas out the passenger side fo the chassis.

Then I need to figure out the firewall and mount the steering and transmission coolers and start the tear down for welding....

mike shelton 10-28-2011 02:11 AM
wow, think of the man hours in that exhaust work !!!!!!!

oklahomawelder 10-28-2011 08:52 AM
Quote:
Originally Posted by mike shelton (Post 56765)
wow, think of the man hours in that exhaust work !!!!!!!
There are a few, but not as many as you might think....

BadHabit 10-28-2011 10:17 AM
Looking really good. Artec makes some nice parts.

oklahomawelder 10-28-2011 02:02 PM
Quote:
Originally Posted by BadHabit (Post 56768)
Looking really good. Artec makes some nice parts.
Yes they do. I think they have the best stuff out there right now...

oklahomawelder 10-29-2011 10:26 PM
8 Attachment(s)
Made a little more progress today. Passenger side floor is done... Started on Passenger side firewall but its not turning out like I want it to....

oklahomawelder 01-18-2012 03:01 PM
6 Attachment(s)
A little more aluminum work done and Wilwood pedal and MC's mounted...

AidaJK11 01-18-2012 08:03 PM
Amazing!

oklahomawelder 01-18-2012 08:06 PM
Quote:
Originally Posted by AidaJK11 (Post 59747)
Amazing!
Thanks....


All times are GMT -4. The time now is 02:45 AM.
Page 2 of 2 1 2
Show 25 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.