C.O.R.E. FORUM

C.O.R.E. FORUM (https://www.cincyoffroad.com/forumOLDVB3/index.php)
-   For Sale - Offroad Related (https://www.cincyoffroad.com/forumOLDVB3/forumdisplay.php?f=6)
-   -   Moving sale (https://www.cincyoffroad.com/forumOLDVB3/showthread.php?t=10157)

u&k metal works 04-09-2013 11:38 PM

Moving sale
 
I've got some stuff you know you need:
Dana 30 Aussie locker used SOLD
Dana 30 chromoly shafts SOLD
Np231 4cyl w/newer chain$75

More super sweet items and pics to be posted soon located in bainbridge oh

u&k metal works 04-09-2013 11:46 PM

More stuff:
4.88 gears dana30 rev and dana35 used $75
Gm 400auto 2wd approximate 80000 miles $175

u&k metal works 04-15-2013 07:03 PM

6 Attachment(s)
Attachment 6587Attachment 6588Attachment 6589Attachment 6590Attachment 6591Attachment 6592 pics

u&k metal works 04-17-2013 08:04 AM

3 Attachment(s)
New addition Attachment 6595 set of 5 jk steel wheels = case of beer. Attachment 6596 for you weight lifters out there a sexy 203 out of a chevy= $50
Attachment 6597 208 with 32 spline input= $50

KargoMaster 04-17-2013 09:43 AM

can I assume the 203 has a 27spl input?

u&k metal works 04-22-2013 12:18 PM

Yes sir the 203 is 27 spline it would look sexy in your shop

Kdb734 05-01-2013 08:14 PM

Ttt

u&k metal works 05-05-2013 06:08 PM

New super low mothers day special prices

cmartin 05-06-2013 09:20 AM

What is the input shaft length on the 231? I bought one with a sye on it but don't know if it will match my grand.

Sent from my DROID BIONIC using Tapatalk 2

u&k metal works 05-06-2013 12:15 PM

231 has a 21 spline input it's out of a 4cyl tj

u&k metal works 05-06-2013 12:25 PM

I'll measure the length but your grand is prob a 23 spline

bizeeb65 05-07-2013 10:55 PM

still have the aussie?

u&k metal works 05-08-2013 07:43 AM

Quote:

Originally Posted by bizeeb65 (Post 75695)
still have the aussie?

Sorry Aussie just sold thanks

Ragnol 05-08-2013 12:20 PM

dana 30 axle shafts & locker
 
I'm interested in your dana 30 chromoly axle shafts. I'm curious to know if the axle shaft splines are the same as stock. Any more info you could give me is appreciated. Thx

u&k metal works 05-08-2013 01:15 PM

Quote:

Originally Posted by Ragnol (Post 75699)
I'm interested in your dana 30 chromoly axle shafts. I'm curious to know if the axle shaft splines are the same as stock. Any more info you could give me is appreciated. Thx

Pm sent

u&k metal works 05-14-2013 02:07 PM

Updated. New addition Dana 30 stock shafts I have 1 set left $50 a set

u&k metal works 05-15-2013 01:55 PM

More stuff: Dana 30 carrier 3.90 and num. higher I have 2 $20 each

u&k metal works 05-31-2013 06:50 PM

3 Attachment(s)
More stuff 4 36x12.50x15 super swamper tsl these would make good spares they have very little tread I have grooved one to show potential how's $20 a tire if you take them all

Also a set of 6lug 15x8 steel wheels need cleaned up but not terrible $75 takes them
Attachment 6749Attachment 6750Attachment 6751


All times are GMT -4. The time now is 10:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.