C.O.R.E. FORUM

C.O.R.E. FORUM (https://www.cincyoffroad.com/forumOLDVB3/index.php)
-   General Discussions (https://www.cincyoffroad.com/forumOLDVB3/forumdisplay.php?f=17)
-   -   The other Short Bus (https://www.cincyoffroad.com/forumOLDVB3/showthread.php?t=3172)

fabricator 03-10-2009 09:20 AM

The other Short Bus
 
1 Attachment(s)
Spy pics

fabricator 03-10-2009 09:20 AM

1 Attachment(s)
.

fabricator 03-10-2009 09:22 AM

1 Attachment(s)
..

94Dodge Truggy 03-10-2009 09:25 AM

Paint it yellow and it is done! Whose is it? Looks like another Fabricator-Tinbeater build.

KargoMaster 03-10-2009 11:53 AM

Nice! How complicated was the top bob? (glass details?)

What's the plans for the area in the rear? (or going 4-link to eliminate extra frame and leafs?)

tinbeater 03-12-2009 07:55 AM

Quote:

Originally Posted by 94Dodge Truggy (Post 22321)
Paint it yellow and it is done! Whose is it? Looks like another Fabricator-Tinbeater build.


Dont blame that **** on me!!!!
Well I did cut the top down.:D

fabricator 03-12-2009 07:51 PM

Just because you guys was
afraid to let me cut it...

details for a prior glass job
can be seen in the thread below...
http://www.pirate4x4.com/forum/showthread.php?t=94756

fabricator 03-12-2009 10:31 PM

will post more pics as i get them

4RunnerAdam 03-12-2009 11:47 PM

Nice! Looking forward to the rest of the pics!

The body looks just like my junk, rust and all!

carwash 03-13-2009 07:10 AM

wow, that pirate thread is from 2002...

nice work rob.

fabricator 03-14-2009 08:26 PM

Quote:

Originally Posted by carwash (Post 22411)
wow, that pirate thread is from 2002...

I know,

I know,

Tinbeater is gettin old....

humpy 03-17-2009 03:56 PM

Quote:

Originally Posted by fabricator (Post 22453)
Tinbeater is gettin old....

thats 4 DAMN SURE!!!! HAHA :beers:

shortbus 03-17-2009 09:36 PM

tinbeater has the right name. he's good at beating up tin. just let him drive:D 2002 was the 1st shortbus. now the new one is getting choped ,cut & welded on. fabricator you were right on the cut. JUST CUT IT!:beers:

fabricator 03-17-2009 10:14 PM

1 Attachment(s)
What you mean Mark?
He don't have a scratch on this one?

humpy 03-18-2009 05:08 PM

Quote:

Originally Posted by fabricator (Post 22544)
What you mean Mark?
He don't have a scratch on this one?

thats funny ****t!!!!

tinbeater 03-18-2009 08:25 PM

Quote:

Originally Posted by shortbus (Post 22543)
tinbeater has the right name. he's good at beating up tin. just let him drive:D 2002 was the 1st shortbus. now the new one is getting choped ,cut & welded on. fabricator you were right on the cut. JUST CUT IT!:beers:

Boy I cant wait to drive the new short bus.:D :D

shortbus 03-18-2009 08:55 PM

well you need to get over here. i forgot that pic. you look good but thats after you drove it .:D there wasn't any:beers: was there

fabricator 03-18-2009 11:03 PM

Ya think the drunks jumping up and down on the roof
may have something to do with it?

Well as i recall, that was right after
every piece of glass in it was blown out, wasn't it?..

May have been the driving...


All times are GMT -4. The time now is 11:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.