C.O.R.E. FORUM

C.O.R.E. FORUM (https://www.cincyoffroad.com/forumOLDVB3/index.php)
-   General Discussions (https://www.cincyoffroad.com/forumOLDVB3/forumdisplay.php?f=17)
-   -   Samurai Alternator Options? (https://www.cincyoffroad.com/forumOLDVB3/showthread.php?t=4194)

biggin69 11-09-2009 08:18 PM

Samurai Alternator Options?
 
What alternator are you Sammy guys running? I have a 1.6 8v and have read on other forums that the GM upgrade is not so good as they are not made to turn more that 3000 rpm. ??? Just trying to see what is out there. Thanks!:beers:

tinbeater 11-09-2009 11:11 PM

Quote:

Originally Posted by biggin69 (Post 29857)
What alternator are you Sammy guys running? I have a 1.6 8v and have read on other forums that the GM upgrade is not so good as they are not made to turn more that 3000 rpm. ??? Just trying to see what is out there. Thanks!:beers:


I very much disagree.
I run a 94 amp gm. 1 wire on my 1.6 8v. with zero problems.

Flxratd 11-10-2009 11:19 AM

Quote:

Originally Posted by tinbeater (Post 29879)
I very much disagree.
I run a 94 amp gm. 1 wire on my 1.6 8v. with zero problems.

i agree gm runs just fine
never heard the 3000 rpm

biggin69 11-10-2009 03:43 PM

Alright, so what do i need to do the conversion?

8UP 11-10-2009 05:19 PM

Go with a GM alt., they're cheap and easy to find.The one wire set up is not preferred for our use due to the fact that it doesn't fully energize until about 1800-2200 RPM depending on who you talk to. It's easy to do the three wire system, there are tons of sites on the net that will walk you through it.

Nuts 11-10-2009 05:43 PM

http://www.zukikrawlers.com/showthre...hlight=GM+wire

Its easy as pie, but spend the money and buy the alt somewhere beside Autozone. My last 2 from there lasted 1 trip, and 3 trips. They had lifetime warrentys but it sucks changing them all the time.


Adam

hotrod 11-10-2009 08:24 PM

ive been looking into doing the gm upgrade too, hmm i just might do it now that i have some good info


All times are GMT -4. The time now is 10:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.