Klune-V
 

Anybody running one? Are they good or bad I am thinking about putting one in my new buggy I`m building
Thanks Jeff

What motor and tranny is it going behind?

So long as it has 32 spline in/outs it will survive just fine under 450hp. Worked on several trucks with very healthy stroked small block motors and they never had any issues with the klune. The only breakage I have heard is from a few guys on Pirate with big blocks and it broke years after they were installed.

AARON

This one is 23 spline in and out running with a 3.4 chevy v-6 torque flight 904 klune 4.0 with a dana 300 in about a 2500-3000# buggy
Later Jeff

Keep the fluid changed and it should last forever. Better plan on adding some upgrades to the 300, a 4:1 going through that case will put put the hurt on the stock outputs.

AARON