RC Crawler guys..
 

Bought my son a Axial AX10 RTR ..fun as hell little rig. I'm looking at what small improvements can/should we make before we start flogging this thing.

Tires .. lower the COG .. hard parts..?

Fun little rigs. I built a nice little rock garden the back yard for mine. Buy the 4 link brackets that mount to the top of the diffs and get rid of the makeshift trianleation they have. This will help get rid of the torque twist of the body. Also the driveshafts don't last long so get some traxxis driveshafts on the cheap. I also got rid of the stock springs and got softer springs and a new aluminum belly pan.

Tons of fun.


Sent from Sputnik. Please send more Tang.

Register on RCCrawler.com and read through the Axial AX-10 Thread. There is a begginers Guide and lots of free/cheap upgrades that will help you out.

Will do..

I did a little E-tradin on Pirate this morn and got a second used AX10..has sticky tires and aluminium links and steering gear.

Thanks, Jeff

Let see some pics of the rock garden.

I'll post up after I get back from wheeling tomorrow.


Sent from Sputnik. Please send more Tang.

Buy a spare parts kit. I had one a few months ago and ended up breaking rod ends and the little "Y" link. I replaced it with an aluminum one. Get a Rooster Crawler from Novak. They sell a kit that comes with the Rooster Crawler and a 55T motor that is a great combo.

Go to a local tire shop and see if you can get some old stick on weights. Most shops will give them away for free and they make great weights for the tires, just stick them between the foams and the wheels. You'll also want to get a new set of tires. White dot Rovers are a great choice and you'll definitely see a difference.

The sky is really the limit on these things, but be careful because you can end up spending enough money on the AX10 to afford an XR10 and those are night and day in regards to performance.

just turn them into scalers. I have 2 scale crawlers.

The used rig I got has white Rovers on it along with a couple bodies and various sets of soft springs .. it's also a RTC so I think it has a more "crawl" oriented motor and controller?

Move the battery to the front axle. Huge difference in stability.

My son has one and it has started acting up. It's very "jerky" and sometimes wont move unless you adjust the gain on top of the controller all the way to forward or reverse. The steering is also really weak. I was told the servo might be going bad. Any ideas? I'd like to fix it for him.

IMO stay away from the Novak stuff. The drag brake is garbage. I prefer Tekin. A Tekin FXR speedo and the motor of your choice. I would also recommend a 35t or 45t motor.

Again, your best bet is to read up on the AX-10 on RCCrawler and see what everyone else is running. Why spend the $$$ on something not needed?

As far as breaking rod ends, replace the Axial ones with Traxxas Rustler rod ends. Traxxas part # 1942. Much stronger and direct replacement part. :beers:

Here are a few that I have on my FB page.


http://a5.sphotos.ak.fbcdn.net/hphot..._2855585_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphot..._3832243_n.jpg


An old video.
http://s345.photobucket.com/albums/p...heeling_1_.mp4


Not the best pics but I don't think I have anymore easily linkable.

Well first trip out and I killed the the steering servo..or put a hurt'n on it.

Lost about 50% of it's stroke and broke one ear off it's housing...whats the upgrade?

Was this axial servo? You will want to upgrade to one with steel gears.


Sent from Sputnik. Please send more Tang.

Hitec 7955-TG. Titanium gears, 333oz. of torque. Plenty for your situation.:beers:

Yep , factory Axial unit.

BTT for some more discussion..

I'm now knee deep into these things..I'm looking for a new motor to replace the crappy and too fast 27T in my first crawler.

Any recommendations for a affordable upgrade .. just a better motor or go with a motor/sc combo?

I passed this crawler onto my 8 year old and it's just way to much wheelspeed for his "Tim Cameron" driving style...

Anybody have a 45T motor for sale?

I have sevral 45T's and would gladly give you one if you want it. I recommened cheap Integy 45T's. They are like $18 a piece. When the brushes wear out, pitch it and buy a new one! :beers:

I too have several and I agree with the rest .... :thumbup:

RC Crawler event?
 

Does anyone who has seen the tires at Big Rock think some kind of an RC event would work some how?

I think the hardcore Comp guys would compete anywhere there's a winner and loser.... as a play RC crawler guy I want natural or atleast natural looking rock to have fun on.

My little brother just got one of these. Gonna have to see how his holds up and might buy one for myself.

i think an rc event would be a great addition to big rock. on the tires or some place back in the woods would be great. next time i come down i plan on bringing mine along to drive around while im taking a break between wheeling. heres a picture of the one i built this year

http://i844.photobucket.com/albums/a...r/P1150790.jpg

I think you would be better off doing a Scale Comp/Even rather than a 2.2 style Comp. A scale trail run would be cool. Just my $0.02 :beers:

need to get my scaler rolling.....all i need is a pinion.

on the backyard course...
http://i17.photobucket.com/albums/b5...7-24161635.jpg