C.O.R.E. FORUM

C.O.R.E. FORUM (https://www.cincyoffroad.com/forumOLDVB3/index.php)
-   Tech and How-To (https://www.cincyoffroad.com/forumOLDVB3/forumdisplay.php?f=3)
-   -   Dana 60 (https://www.cincyoffroad.com/forumOLDVB3/showthread.php?t=812)

itbrokeagain 08-26-2007 03:29 PM
Dana 60
 
Is a full float rear 60 the same all years? Will shafts from one fit the other?

94Dodge Truggy 08-26-2007 04:27 PM
No. I have seen spline counts and shaft size vary.

JET455 08-26-2007 09:43 PM
Quote:
Originally Posted by 94Dodge Truggy (Post 5814)
No. I have seen spline counts and shaft size vary.
Yeah me to my Shaft is Bigger....:p

itbrokeagain 08-26-2007 10:51 PM
Any web sites that will tell you what you have?

94Dodge Truggy 08-27-2007 07:03 AM
The dom number on the tubing of the axle will usually help. Power clutch and drive were able to use that number to refrence. The ring and pinion also have markings on them which could help.

JET455 08-27-2007 07:36 AM
take a look here..


http://www.autohobbydigest.com/dana.html

itbrokeagain 08-27-2007 11:07 PM
Wow. That was very helpful. Thank you.

JET455 08-27-2007 11:23 PM
Quote:
Originally Posted by itbrokeagain (Post 5867)
Wow. That was very helpful. Thank you.
NP


All times are GMT -4. The time now is 06:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.