39.5 Iroc radials
 

Anybody ever run these? I can get a set for a great price. Just looking for opinions on the iroc's in general.
thanks

What are they going on?
From what I have heard they are great with a lot of tread and they are ok once they are worn down a little.
I've wheeled with guys that run them and they seemed to work well.

They are going on a jeep with one tons. It is used for off-road only.

They aren't the best tire for this area. I ran them on my old YJ and they don't do well in mud, etc. That said, if they're cheap, I'd go for it. They're not so bad that I would pass up a good deal on them.

They are radials and its $400 for four of them 90% tread, one has a sidewall cut that will need repaired.

i hate iroks!!!! never had any luck out them

We call them Isux... Don't waste your $$

1: buy them 350$
2: Fix sidewall.
3: ????????
4: profit.
:beers:

I hope they work because I just bought three from carwash....bias though...

ive got them on a small light toyota based buggy and they work great for me the bias plys they dont seem like they have alot of sidewall for a heavy full size unit

dont run radial for offroad, i could never get mine to bite compared to boggers or tsl's, i will never get another set, i was that dissappointed with there performance, had them on lite zuk buggy also

Never had radials but run the bias for close to three years I won't buy another set. Unless I got a killer deal yours don't sound bad if they r a decent size tire. IMO they look wore out when u get them and wear quick. Also the side walls r thin I run bead locks and can't go less than 10# of air pressure. But they go pretty good never had goin issues just flat tire from blowin inner bead