splines twisted
 

How much can a stock dana 44 shaft twist at the splines before it breaks? Had the rear tore down and noticed the splines are twisted about 1 spline width. Plan on running it but how much life does it have left? Im running 37x14 irocs

You're already on borrowed time...

i bet it will be fine till it breaks :D

Make it your mission next time out to snap it!!!!

put truck in reverse, goose it, and twist them back straight again...problem solved:thumbup:

time for a upgrade :thumbup:

Put it in opposite side! Will let it twist twice as far before it's a problem :evilgrin:

I read somewhere on Pirate that this is how the do it in the south! South of the Ohio river that is!:evilgrin:

cant believe anything on pirate, bunch gay westcoast flatbillers!

Time for an alloy shaft upgrade.You know if you let it go till breaking,it will be at the worse possible time.Then the hassle of fishing out all the broken pieces.:sweatin:

Nick

The way you drive it will last forever. smileypoke

The last time I knowingly ran a twist axle spline it cost me a Detroit locker...

Thanks j. Ordered one off ebay. Doesnt seem worth breaking anything else. Even though it might get me the reason for tons. :thumbup: