C.O.R.E. FORUM - View Single Post

Deranged89 · 01-12-2008, 06:44 PM

seems your well on your way then. if your tryin to find ideas for projects regarding your theater stuff, just look at what you are already using, how it works, how you can make it work different, and go from there. im always finding ways at work to do parts different. currently im writing a program to drill and mill bolt slots in an adapter, we've always done these on the table and mill before, takes about 45min to do one part. but hopefully after i get the program done i can just put the part in my cnc, press start and stand back for 3 or 4 minutes while the machine does all the work.

01-12-2008, 06:44 PM	#4
Deranged89 Join Date: May 2007 Location: Crittenden, KY Posts: 43	seems your well on your way then. if your tryin to find ideas for projects regarding your theater stuff, just look at what you are already using, how it works, how you can make it work different, and go from there. im always finding ways at work to do parts different. currently im writing a program to drill and mill bolt slots in an adapter, we've always done these on the table and mill before, takes about 45min to do one part. but hopefully after i get the program done i can just put the part in my cnc, press start and stand back for 3 or 4 minutes while the machine does all the work. __________________ REMEMBER WHEN GAS USED TO ONLY COST AN ARM AND A LEG???