C.O.R.E. FORUM - View Single Post

jeeptech77 · 01-17-2008, 01:04 PM

is it a oem case?? if so you will need xray vision to see the linkagez due to being the same in design as a top loader trans ..has the problem appeared after the 6.4/1 install if so my guess is install issue (i fixed a 4.1 some one modifed the case when they should not have)if not there may be a issue with a little rubber gromet in the t case it normally causes binding due to saturation in gear oil but its worth checking before you pull it it can be changed in the zuk the gromet has a funky name try searching pirate 4x4 there used to be a article on it a die hard zuk guy will know the name its inexpensive as well ............

01-17-2008, 01:04 PM	#3
jeeptech77 jeeptech77 Join Date: Aug 2007 Location: cincinnati Posts: 12	hmmmmmmmmmmmm is it a oem case?? if so you will need xray vision to see the linkagez due to being the same in design as a top loader trans ..has the problem appeared after the 6.4/1 install if so my guess is install issue (i fixed a 4.1 some one modifed the case when they should not have)if not there may be a issue with a little rubber gromet in the t case it normally causes binding due to saturation in gear oil but its worth checking before you pull it it can be changed in the zuk the gromet has a funky name try searching pirate 4x4 there used to be a article on it a die hard zuk guy will know the name its inexpensive as well ............