C.O.R.E. FORUM - View Single Post - "THE HEEP" Buildup (SOA, 3/4 axles, Stak, Hi-steer)

JeepHD · 02-17-2008, 03:15 PM

Got the front axle about 90% done. Need to route brake lines and burn on some shock mounts. I mounted it forward 2 inches. Also got the tires mounted. Only problems I ran into was that the bleeder screws are too long and hit the rim. Also had to grind the bolt that holds the brake clip on. Any ideas on the bleeder screw? I am going to try to get a shorter one, otherwise I will just have to grind off the end of the ones I have.

Here is some pics. Also, I am adding some pics of the high steer and front axle in previous posts.

Name: DSCF0065.JPG
Views: 2474
Size: 45.7 KB

Name: DSCF0065.JPG
Views: 2474
Size: 45.7 KB

Name: DSCF0066.JPG
Views: 2444
Size: 50.2 KB

Name: DSCF0068.JPG
Views: 2455
Size: 44.6 KB

Name: DSCF0069.JPG
Views: 2428
Size: 46.6 KB

Name: DSCF0070.JPG
Views: 2428
Size: 47.3 KB

02-17-2008, 03:15 PM	#27
JeepHD www.buckeyejeepers.com Join Date: Apr 2007 Location: Houston, OH 45333 Posts: 276	Got the front axle about 90% done. Need to route brake lines and burn on some shock mounts. I mounted it forward 2 inches. Also got the tires mounted. Only problems I ran into was that the bleeder screws are too long and hit the rim. Also had to grind the bolt that holds the brake clip on. Any ideas on the bleeder screw? I am going to try to get a shorter one, otherwise I will just have to grind off the end of the ones I have. Here is some pics. Also, I am adding some pics of the high steer and front axle in previous posts. __________________ 1994 YJ, 4.0, 5 speed. *2006 Dodge 2500 Cummins, 4x4 Auto,Quad cab, LongBed, Tekonsha Prodigy(Tow Rig)