C.O.R.E. FORUM - View Single Post - Where do you guys get your driveshafts from?

mckeddie · 02-21-2008, 06:34 PM

are you looking for shafts for a trail rig? if so, go to the local scrap yard, pick upa couple of cv shafts that are too long for your needs, cut them to length (grind off the welds with an angle grinder, and cut to length with a chop saw), and reweld to the proper length. i've only had a shaft made one time, every other time has always been free from parts we had laying around. that's ridiculous to pay that much!

greg

02-21-2008, 06:34 PM	#4
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	are you looking for shafts for a trail rig? if so, go to the local scrap yard, pick upa couple of cv shafts that are too long for your needs, cut them to length (grind off the welds with an angle grinder, and cut to length with a chop saw), and reweld to the proper length. i've only had a shaft made one time, every other time has always been free from parts we had laying around. that's ridiculous to pay that much! greg __________________ zuk buggy.....it'll be a jeep eventually.