C.O.R.E. FORUM - View Single Post - AX-15 Rebuild?

JeepHD · 03-24-2008, 03:23 PM

How hard is it to pull apart an AX-15 for a rebuild, basically new synchros and if anything else looks worn? I have done the old T-150s and T-176s before, just not the newer ones. The tranny really shifts pretty good, just shifts hard when cold.

I have an NV3550 that I had put in in it's place and I ma just not happy with it. Sounds like a lot noise from the front bearing and it pops out of 3rd fairly easily, so I thought I would freshen the AX-15 up a bit and swap it back in.

03-24-2008, 03:23 PM	#1
JeepHD www.buckeyejeepers.com Join Date: Apr 2007 Location: Houston, OH 45333 Posts: 276	AX-15 Rebuild? How hard is it to pull apart an AX-15 for a rebuild, basically new synchros and if anything else looks worn? I have done the old T-150s and T-176s before, just not the newer ones. The tranny really shifts pretty good, just shifts hard when cold. I have an NV3550 that I had put in in it's place and I ma just not happy with it. Sounds like a lot noise from the front bearing and it pops out of 3rd fairly easily, so I thought I would freshen the AX-15 up a bit and swap it back in. __________________ 1994 YJ, 4.0, 5 speed. *2006 Dodge 2500 Cummins, 4x4 Auto,Quad cab, LongBed, Tekonsha Prodigy(Tow Rig)