[itbrokeagain]

I am sprung over with stock Yj springs with no issues, now. On the front I added full length Yj main leaves and cut the eyes out. I cut several leaf springs in half and put them in every other spring and put them on the back to eliminate my axle wrap. On the rear I added a 2500 Lb main leaf from Brighton Spring and put a anti-wrap bar on. You will need to build a beefy one because I destroyed the first one. My wrap is pretty much gone and it flexes very well.
I am running a 302, T-18, and 37 boggers. I can dump the cluth and not have any issues.

One problem I did have is the shackles folding up against the frame when coming up to an obstacle. This happened on the front and rear. I welded some stops to the frame so the shackle could not fold back.

I am very happy with this set up and if you get yours right you will be happy with it.