OK . I could not find the correct u-bolts for the rear at any local stores and it was to late to drive to a spring shop . I had to get the Jimmy out of the garage so my mom and dad could have a garage sale during the Great Trenton garage sale week end . I ended up cutting a set of used u-bolts in half and welded some pieces of all thread to the now J- bolts . I used two side and cranked them down tight ........ I thought

I backed out of the garage very very carefully and got to the end of the driveway and BANG !
The rear didn't come completely out from under the rig but almost . The big problem was it happened about 1:30 in the morning and all the neighbors had their windows open. It took till around 2:30 to get the rear end back in place
So it sits beside the house with ratchet straps holding the rear in .
I will be using a tow truck to get it back in the garage tomorrow

,
I called Copperhead Sat. morning and got the " oh your parts are in the mail " line of BS. so we'll see how much longer I will have to wait .
Going to drive down to Brieghton(SP?) Spring when I get off work tomorrow and get u-bolts ... I hope .