C.O.R.E. FORUM - View Single Post

Hope Springs Hauler · 03-28-2011, 09:06 AM

I decided to adjust the front pinion angle and everything that goes with it. So with some help, we turned the squirrel around and I removed the front axle.

Saturday, I got the new intake manifold put on, the adapter completed and the propane carb installed. I also removed the computer and associated wiring. Then on Sunday afternoon, I removed the old spring perches and welded on the new ones. (The size difference is amazing

and they ought to help with the spring wrap that I was getting.)

The axle now needs to be disassembled so the the cut and turn on the knuckles can be done. I also need to rebuild the vacuum lockoff because the sami ran with no vacuum applied to the VFF-30

03-28-2011, 09:06 AM	#43
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431	I decided to adjust the front pinion angle and everything that goes with it. So with some help, we turned the squirrel around and I removed the front axle. Saturday, I got the new intake manifold put on, the adapter completed and the propane carb installed. I also removed the computer and associated wiring. Then on Sunday afternoon, I removed the old spring perches and welded on the new ones. (The size difference is amazing and they ought to help with the spring wrap that I was getting.) The axle now needs to be disassembled so the the cut and turn on the knuckles can be done. I also need to rebuild the vacuum lockoff because the sami ran with no vacuum applied to the VFF-30 __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX Last edited by Hope Springs Hauler; 03-28-2011 at 09:18 AM.