C.O.R.E. FORUM - View Single Post

blazerbrad · 11-15-2012, 07:51 AM

To do it right you need to check the backlash, gear pattern, and bearing preload. If out of spec you would need to adjust the shims. I've seen people just reuse the old shim specs and it was pretty close, but it that is not always the case.

11-15-2012, 07:51 AM	#2
blazerbrad - CORE Member - Join Date: Feb 2007 Posts: 831	To do it right you need to check the backlash, gear pattern, and bearing preload. If out of spec you would need to adjust the shims. I've seen people just reuse the old shim specs and it was pretty close, but it that is not always the case.