C.O.R.E. FORUM - View Single Post

BillysGruff · 06-03-2014, 01:04 PM

Update time.
Got the front end sitting on the tires, so much work. Does anyone have a bender w/1.5" die? I need to finish up with the drag-link, weld on the double-shear brackets for the HSA's, flip it around in the driveway, toss in the 10.5, build/get front d-shaft, and then it'll at least be driveable. I still want to do a panhard, and even farther downthe road I'm going to build sliders and a rear bumper.

Double-shear XJ pitman arm

Shackle angle

Centerline is about 3" forward

06-03-2014, 01:04 PM	#52
BillysGruff Goats on the Roof! Join Date: Sep 2012 Posts: 62	Update time. Got the front end sitting on the tires, so much work. Does anyone have a bender w/1.5" die? I need to finish up with the drag-link, weld on the double-shear brackets for the HSA's, flip it around in the driveway, toss in the 10.5, build/get front d-shaft, and then it'll at least be driveable. I still want to do a panhard, and even farther downthe road I'm going to build sliders and a rear bumper. Double-shear XJ pitman arm Shackle angle Centerline is about 3" forward Last edited by BillysGruff; 06-03-2014 at 01:09 PM.