C.O.R.E. FORUM - View Single Post

93 Krawler · 07-19-2018, 12:49 PM

I got the front diff back together. Superatv has a lifetime warranty on their ring and pinion set and the sprag, so that cost me zero dollars. They also upgraded me to the 4140 steel sprag for free. I did have to buy a rebuild kit and a new armature plate. Between the 8 tab plate and the steel sprag, it should hold together better.

I believe the reason I broke the bearing carrier is I didn't know you were supposed to use Loctite 603 retaining compound on the bearing. That might have kept the c clip groove from breaking off. It will be on there from now on, so we will see if it happens again.

07-19-2018, 12:49 PM	#4
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069	I got the front diff back together. Superatv has a lifetime warranty on their ring and pinion set and the sprag, so that cost me zero dollars. They also upgraded me to the 4140 steel sprag for free. I did have to buy a rebuild kit and a new armature plate. Between the 8 tab plate and the steel sprag, it should hold together better. I believe the reason I broke the bearing carrier is I didn't know you were supposed to use Loctite 603 retaining compound on the bearing. That might have kept the c clip groove from breaking off. It will be on there from now on, so we will see if it happens again. Last edited by 93 Krawler; 07-19-2018 at 01:35 PM.