C.O.R.E. FORUM - View Single Post - 95 S-10 Truggy Build

93 Krawler · 09-05-2019, 10:08 AM

For the exhaust I bought a few mandrel bent 2.5" fittings from Summit Racing.
I had to cross over to the passenger side to keep the heat away from the tcase and fuel lines on the driver side. I used a u pipe to make a y pipe and ran 2 into 1 down the passenger side. All in all it wasn't too bad to do. I did have to buy a set of aftermarket manifolds so the driver pipe didn't exit on my link bar. I used a band clamp so I can separate it in 2 pieces for easy removal from the rig.

09-05-2019, 10:08 AM	#166
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069	For the exhaust I bought a few mandrel bent 2.5" fittings from Summit Racing. I had to cross over to the passenger side to keep the heat away from the tcase and fuel lines on the driver side. I used a u pipe to make a y pipe and ran 2 into 1 down the passenger side. All in all it wasn't too bad to do. I did have to buy a set of aftermarket manifolds so the driver pipe didn't exit on my link bar. I used a band clamp so I can separate it in 2 pieces for easy removal from the rig.