01-27-2008, 11:06 AM
|
#1 |
|
Dodge Truggy
Join Date: Aug 2007
Location: Small town, West Virginia
Posts: 83
|
yoke
Does anyone know if u can use a dana 60 yke on a gm 14 bolt?
|
|
|
|
01-27-2008, 11:47 AM
|
#2 |
|
Cleaning off the rust...
Join Date: Jan 2007
Location: Cincinnati, OH
Posts: 1,009
|
Not sure about a rear 60 but a front 60 yoke won't work...
They have different dia shafts, different dia seals, and different spline counts... 14 bolt is 30 spl, front dana60 is 29 spl
__________________
brad  5.0L | 435 | 203 | 300 | 4.10 | 39.5 Buildup BACK underway... 
Last edited by KargoMaster; 01-27-2008 at 11:56 AM. |
|
|
|
|
01-27-2008, 10:09 PM
|
#3 |
|
Dodge Truggy
Join Date: Aug 2007
Location: Small town, West Virginia
Posts: 83
|
thanx
|
|
|
|
|
01-28-2008, 08:31 PM
|
#5 |
|
Dodge Truggy
Join Date: Aug 2007
Location: Small town, West Virginia
Posts: 83
|
yeah I tore em bothe apart and was huge diff thanx
|
|
|
|
|
01-28-2008, 08:59 PM
|
#6 |
|
EX-Vice President
Join Date: Jan 2007
Location: Fairfield, Ohio
Posts: 3,048
 |
How about finding a driveshaft that fits the rear yoke and splicing it to yours? A decent powertrain shop can work this out.
|
|
|
|
|
01-29-2008, 03:28 PM
|
#7 |
|
Dodge Truggy
Join Date: Aug 2007
Location: Small town, West Virginia
Posts: 83
|
u-joint fits a little loose no more play than what was in the 60 yoke the 231 i found ad a slip yoke eliminator on it
|
|
|
|
 |
|
|
Linear Mode
