spicer 35 splined innner and outer axle shafts

jwend · 10-22-2012, 06:05 PM

factory inners, new joints, and new spicer 35 splined outers.. I bought them as spares from a buddy... selling rig so no need any more... 350.00 859six095356

jwend · 10-22-2012, 06:06 PM

s

jwend · 10-29-2012, 01:04 PM

Some one needs some strong none kneck down axle shafts with 35 spline outers! Come on make me a offer!

bizeeb65 · 10-29-2012, 04:22 PM

not sure if it matters, but chevy? ford? dodge?

twiztedzuki · 10-29-2012, 04:32 PM

think they Hyundai but they cross over to chevy/dodge

jwend · 10-31-2012, 12:30 PM

they are chevy.. but they will fit a dodge.. no fords... I want them gone bump!

jwend · 11-04-2012, 07:15 PM

make me a offer.. want them gone

olivesta500 · 11-11-2012, 08:17 PM

Still have these? Can you measure from the center of the cap to the end of the splines on the inners? I have a Dodge 60 but Im pretty sure the inners are different length than the Chevy 60s.

jwend · 11-11-2012, 08:32 PM

chevys and dodges are the same, i can measure though... give me a bit

humpy · 11-12-2012, 07:29 AM

Everything is same except shortside inner is 1 5/8 shorter

jwend · 11-12-2012, 07:48 AM

I was always told the dodge and Chevy are exact. And the ford shirt side is the different one.. Huh

humpy · 11-12-2012, 08:15 AM

I thought so too till I linked a dodge chevy into a truck for a guy... The short side sux because the axle tube is so short u can't hardly get tabs on it... Other than that they r identical... Ford is a whole different animal from those too

jwend · 11-16-2012, 12:26 PM

sold

KargoMaster · 11-17-2012, 04:37 PM

Whoever grabbed these, got a great deal...

10-22-2012, 06:05 PM	#1
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	spicer 35 splined innner and outer axle shafts factory inners, new joints, and new spicer 35 splined outers.. I bought them as spares from a buddy... selling rig so no need any more... 350.00 859six095356 __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

10-22-2012, 06:06 PM	#2
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	pics s Attached Thumbnails __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

10-29-2012, 01:04 PM	#3
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	Some one needs some strong none kneck down axle shafts with 35 spline outers! Come on make me a offer! __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

10-29-2012, 04:32 PM	#5
twiztedzuki Join Date: May 2008 Location: Waverly ohio Posts: 586	think they Hyundai but they cross over to chevy/dodge __________________ SMITH BUILT PERIOD

10-31-2012, 12:30 PM	#6
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	they are chevy.. but they will fit a dodge.. no fords... I want them gone bump! __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

10-29-2012, 04:22 PM	#4
bizeeb65 Join Date: Mar 2011 Posts: 11	not sure if it matters, but chevy? ford? dodge?

11-04-2012, 07:15 PM	#7
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	make me a offer.. want them gone __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

11-11-2012, 08:17 PM	#8
olivesta500 Sergeant Join Date: Jan 2007 Location: Cincinnati Posts: 22	Still have these? Can you measure from the center of the cap to the end of the splines on the inners? I have a Dodge 60 but Im pretty sure the inners are different length than the Chevy 60s.

11-11-2012, 08:32 PM	#9
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	chevys and dodges are the same, i can measure though... give me a bit __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

11-12-2012, 07:29 AM	#10
humpy Join Date: Sep 2008 Posts: 573	Everything is same except shortside inner is 1 5/8 shorter __________________ S10 with a few air shocks..

11-12-2012, 07:48 AM	#11
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	I was always told the dodge and Chevy are exact. And the ford shirt side is the different one.. Huh __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

11-12-2012, 08:15 AM	#12
humpy Join Date: Sep 2008 Posts: 573	I thought so too till I linked a dodge chevy into a truck for a guy... The short side sux because the axle tube is so short u can't hardly get tabs on it... Other than that they r identical... Ford is a whole different animal from those too __________________ S10 with a few air shocks..

11-16-2012, 12:26 PM	#13
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	sold __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

11-17-2012, 04:37 PM	#14
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	Whoever grabbed these, got a great deal... __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...