|
|
05-04-2013, 12:18 AM
|
#1 |
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
Grand Cherokee 1 ton build
This is my new wheeler. 97 grand Cherokee limited 5.2
Plans Ford king pin 60 5.38 gears welded 14 bolt 5.38 gears welded Full frame reinforcement Exo-cage At least 38s on bead locks 231 with sye 4 link rear on coils 3 link front on coils Tons of little stuff Progress up to this point has been all the metal work looks like I haven't done much but cleaning the frame of all the stock brackets took forever but I think it was worth it in the end. Rear passenger side welded in all the rest of the pieces are cut out and ready to weld in. I did really like the templates. I have been watching to much extreme 4x4 hahaha Sent from my DROID BIONIC using Tapatalk 2 |
|
|
|
05-04-2013, 12:25 AM
|
#2 |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
The passenger side frame rail almost done. Just need to bend the front up at the fender well. All goes as plan and that will be all one piece. Driver side should go faster.
Sent from my DROID BIONIC using Tapatalk 2 |
|
|
|
|
05-04-2013, 10:08 AM
|
#3 |
|
Join Date: Sep 2008
Location: Middletown, OH
Posts: 57
|
Zj
Seems kind of like a waste of money :)
Looks good |
|
|
|
|
05-04-2013, 10:15 AM
|
#4 |
|
Join Date: Sep 2008
Posts: 573
|
Nice work frame reinforcement is good idea... We are workin on an xj that's gettin the frame plates ruffstuff makes for em... One question.. Y only 38s if your goin tons? The diffs will drag everywhere.. Go on to a 42" tire u wont regret it
__________________
S10 with a few air shocks.. 
|
|
|
|
|
05-04-2013, 02:15 PM
|
#6 |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
38s will be the smallest. I plan on cutting a lot of the body out of the way but didn't know if 42s would just be to big. I would like to do the 13 bolt cover for the rear but down the road. I'm sure that boat anchor will drag everything.
how do you like the ruff stuff rails? Sent from my DROID BIONIC using Tapatalk 2 |
|
|
|
|
05-04-2013, 04:54 PM
|
#7 |
|
Join Date: Sep 2008
Posts: 573
|
Ruffstuff rails r bad ass and user friendly... I got buddy with some 42 pitbulls for sale... They only measure 40" tall... Look good on that grand
__________________
S10 with a few air shocks..
|
|
|
|
|
05-05-2013, 06:00 PM
|
#8 |
|
Join Date: Sep 2008
Location: Middletown, OH
Posts: 57
|
Any new updates on this
|
|
|
|
|
05-05-2013, 06:11 PM
|
#9 |
Join Date: May 2008
Location: Waverly ohio
Posts: 586
|
this gonna b a pimp ride!! humpy rite 38s to small
__________________
SMITH BUILT PERIOD |
|
|
|
|
06-05-2013, 07:26 PM
|
#10 | |
Join Date: Jul 2011
Location: Southern Ohio
Posts: 55
|
Quote:
|
|
|
|
|
|
05-06-2013, 01:28 AM
|
#11 |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
Got all the frame cleaned and ready to weld for the long section under the passenger compartment today and test fit a little. Start on call tomorrow so if I can get that fully welded in and started on the other side within a few days that would be great
Sent from my DROID BIONIC using Tapatalk 2 |
|
|
|
|
05-06-2013, 01:30 AM
|
#12 | |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
Quote:
Sent from my DROID BIONIC using Tapatalk 2 |
|
|
|
|
|
05-06-2013, 10:10 AM
|
#13 | |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
Quote:
Sent from my DROID BIONIC using Tapatalk 2 |
|
|
|
|
|
05-06-2013, 10:14 AM
|
#14 |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
Pics of my templates they really have made life a lot easier and cut down on so much test fitting.
Sent from my DROID BIONIC using Tapatalk 2 |
|
|
|
|
05-08-2013, 07:22 PM
|
#15 |
|
Join Date: Sep 2008
Location: Middletown, OH
Posts: 57
|
Well.....
Updates..............
|
|
|
|
|
05-19-2013, 07:56 PM
|
#16 |
|
Join Date: Sep 2008
Location: Middletown, OH
Posts: 57
|
Wtf
Can't call this a build thread if there is no actual building going on bud!!!
|
|
|
|
|
05-20-2013, 01:29 AM
|
#17 |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
Hear you go bud. Been waiting to post a finished side. Passenger side is done from rear bumper to past transmission. I prepped the driver side from the rear bumper and am going to cut the holes in the box tube for under the cab up past transmission for that side this week. Now that I know what my plan is hopefully I can finish that side in 2 weeks. Then the crossmember needs built
Sent from my DROID BIONIC using Tapatalk 2 |
|
|
|
|
05-20-2013, 07:55 AM
|
#18 |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
Sent from my DROID BIONIC using Tapatalk 2
|
|
|
|
|
05-29-2013, 11:17 PM
|
#19 |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
New bling for the grand
And only 3 more plates to weld in and the driver side rear is done. Ready start working on the links and put these brackets in |
|
|
|
|
05-30-2013, 09:26 PM
|
#20 |
|
Join Date: Nov 2008
Location: Pleasant Run Farms (near Fairfield)
Posts: 378
|
Cool
__________________
Romans 7-8 |
|
|
|
|
06-02-2013, 02:16 AM
|
#21 |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
Got the grand up to ride height (we think hahaha) tonight. Axles are under and centered for link measurements. Looks like 116½ wb A couple of pics with tires sitting up against axles. Gonna cut the body for clearance and get some links in the rear next. Thanks huntingmatt418 for all the help tonight
|
|
|
|
|
06-02-2013, 02:21 AM
|
#22 |
|
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
Sent from my DROID BIONIC using Tapatalk 2
|
|
|
|
|
06-02-2013, 08:31 AM
|
#23 |
|
Join Date: Sep 2008
Location: Middletown, OH
Posts: 57
|
Grand
Looks good bud, going to be a nice ride when it's done.................next year
|
|
|
|
|
06-03-2013, 08:23 AM
|
#24 |
|
Join Date: Nov 2008
Location: Pleasant Run Farms (near Fairfield)
Posts: 378
|
It would be cool to get a pic of the cousins side by side when you get it rolling.....
__________________
Romans 7-8 |
|
|
|
|
06-08-2013, 01:04 PM
|
#25 | |
Join Date: Apr 2009
Location: Ross
Posts: 70
|
Quote:
|
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
