|
|
10-08-2007, 05:08 PM
|
#1 |
|
Guest
Posts: n/a
|
axle swap
i have a 84 cj-7 i'm installing a set of 1982 3/4 ton chevy axles, whats some of the things i need to do to properly do this swap? thanks 84cj-7-3/4
|
|
|
10-08-2007, 05:12 PM
|
#2 |
|
Your wifes pimp!
Join Date: Jan 2007
Location: Everywhere!!!!!!
Posts: 548
 |
You need to outboard your front spring hangers to match the chevys width. There are kits out there for this by poison spyder etc.. or do your own. And on the rear you can just change the spring perches to match the rear springs.
__________________
   if i am not currently offending you, i will be shortly. |
|
|
|
10-08-2007, 05:45 PM
|
#3 |
|
Guest
Posts: n/a
|
axle swap
thanks i did make my own for the front and i'm now working on the rear, just wasn't sure if thats all that needed to be done. I'm also droppin in a 327 and a 700r4 trans will the stock leave springs hold up. It had a 4 cyclinder when i first got it.
|
|
|
|
10-08-2007, 05:58 PM
|
#4 |
|
I beat anorexia!
Join Date: Feb 2007
Location: Fairfield
Posts: 175
|
might as well stretch the wb while your doin all that work
__________________
I believe this will be our finest hour |
|
|
|
|
10-08-2007, 07:11 PM
|
#5 |
|
EX-Vice President
Join Date: Jan 2007
Location: Fairfield, Ohio
Posts: 3,048
 |
Are you going to have plenty of gearing with the auto and larger tire setup?
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
