Dana 60 Shaft Upgrade

94Dodge Truggy · 08-25-2008, 11:12 AM

Who makes strong 60 ford kingpin front inner axle shafts. Want to replace both inners and leave the outers stock. Longfield makes some nice ones but are pricey. Superior and moser probably do but do you order them from some other company or through them direct? I have mosers in the rear 60 currently. Wonder about a warranty also. (I may break one in WV) Like to buy locally if possible. Thanks, Scott

kyrel69 · 08-25-2008, 11:37 AM

well I know I am going to spend the money on the Longfields b/c you get the inner and outer and the "joint". If you price all 3 they are just a little more but the longfields give you more turning the the U-joint shafts. Also the longfields do not get weaker when you have the wheel cut.

But if you want U-joint shafts. Then I would go with Alloy USA 10 year no matter what warranty.

I think with good U-joint and 35 spline inner and 30 spline outers you are going to break the outer first most of the time. Next will be the ears or the u-joint

94Dodge Truggy · 08-25-2008, 12:31 PM

Outer is what I want to break. Don't want the weak link to be the ring and pinion which is a pain to trail repair. I may go with 35 inner and outer though and make the flange the weak link.

carwash · 08-25-2008, 01:07 PM

Alloy USA all the way. great warranty and great service.

blazerbrad · 08-25-2008, 02:13 PM

If you are wanting to stay with stock 30-spline outers.......don't. They are by far the weak point, especially if you are looking at chromo inners and possibly bling u-joints. I broke 3 stock 30-spline outers (seemed like everytime I went out) with just standard 35-spline Spicer inners and regular Spicer joints, including a 1310 joint in the driveshaft.

If you want to keep a weak spot (fuse), put it in your driveshaft u-joints. Driveshafts are by far the quickest and easiest to replace on the trail.

94Dodge Truggy · 08-25-2008, 03:08 PM

Quote:

Originally Posted by blazerbrad

If you are wanting to stay with stock 30-spline outers.......don't. They are by far the weak point, especially if you are looking at chromo inners and possibly bling u-joints. I broke 3 stock 30-spline outers (seemed like everytime I went out) with just standard 35-spline Spicer inners and regular Spicer joints, including a 1310 joint in the driveshaft.

If you want to keep a weak spot (fuse), put it in your driveshaft u-joints. Driveshafts are by far the quickest and easiest to replace on the trail.

The front driveshaft is not overkill already. I use your same logic with driveshaft as being the weak link. I have warn outer lockouts and may just replace all the shafts and add flanges but do not want to break the ring and pinion. 5.38 ratio.

08-25-2008, 11:12 AM	#1
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Dana 60 Shaft Upgrade Who makes strong 60 ford kingpin front inner axle shafts. Want to replace both inners and leave the outers stock. Longfield makes some nice ones but are pricey. Superior and moser probably do but do you order them from some other company or through them direct? I have mosers in the rear 60 currently. Wonder about a warranty also. (I may break one in WV) Like to buy locally if possible. Thanks, Scott __________________

08-25-2008, 12:31 PM	#3
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Outer is what I want to break. Don't want the weak link to be the ring and pinion which is a pain to trail repair. I may go with 35 inner and outer though and make the flange the weak link. __________________

08-25-2008, 01:07 PM	#4
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	Alloy USA all the way. great warranty and great service. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-25-2008, 11:37 AM	#2
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	well I know I am going to spend the money on the Longfields b/c you get the inner and outer and the "joint". If you price all 3 they are just a little more but the longfields give you more turning the the U-joint shafts. Also the longfields do not get weaker when you have the wheel cut. But if you want U-joint shafts. Then I would go with Alloy USA 10 year no matter what warranty. I think with good U-joint and 35 spline inner and 30 spline outers you are going to break the outer first most of the time. Next will be the ears or the u-joint

08-25-2008, 02:13 PM	#5
blazerbrad - CORE Member - Join Date: Feb 2007 Posts: 831 Images: 6	If you are wanting to stay with stock 30-spline outers.......don't. They are by far the weak point, especially if you are looking at chromo inners and possibly bling u-joints. I broke 3 stock 30-spline outers (seemed like everytime I went out) with just standard 35-spline Spicer inners and regular Spicer joints, including a 1310 joint in the driveshaft. If you want to keep a weak spot (fuse), put it in your driveshaft u-joints. Driveshafts are by far the quickest and easiest to replace on the trail.