Lets see some then and now pics of rigs

sarge · 10-20-2008, 06:40 AM

I'll start because I'm bored .

YJ shortly after getting it , already started trimming fenders , installed rock rails and front and rear bumpers .

and a little later on with more tube and cutting .

and now

carwash · 10-20-2008, 10:13 AM

ha, allt his work, and still nothing to wheel....

4RunnerAdam · 10-20-2008, 11:12 AM

Then...bone stock with a 3" body lift

Now.....solid axle swap and 36" swampers

Pulled the V6...

Installed a V8

Had to hack the front up...

How she is currently sitting..

mckeddie · 10-20-2008, 01:58 PM

here it is a year and a half ago when i got it.

here is how it looked last trip to haspin

should be alot more dented and banged up after this week.

greg

blazerbrad · 10-20-2008, 02:29 PM

My '90 that I bought in '94 with about 49k on the ticker. It was completely stock except for a set of 32" mud tires...don't have any digital pics of it completely stock.

Crappy scanned pic from the Lima 4 Wheel Jamboree about '98 or '99. 4" lift, 33" tires, and 10-bolts with 4.10 gears and limited slips front and rear.

Next step was a welded 14-bolt rear, converted the front 10-bolt to 8-lug (had the limited slip) and 35" MT/R's (no pictures on this PC).

Next big step was a D60 front with a Lock-right and 13/38-16 Swampers. Body was still reasonably straight, but this setup got me into lots of trouble.

Current setup. 39.5" Swampers, full cage, 3x3 rockers, custom front and rear bumpers, winch, hydro-assist, added a 3rd seat for my son in the back (the kid in the front is a buddy's son).

maddhatter · 10-20-2008, 09:05 PM

Meet FLIPPER.

Before

After. It's not "done" yet but it's came a long way so far. I hope to give it a good test run at Zuk spook.

carwash · 10-20-2008, 10:09 PM

it looks like a side by side.

10-20-2008, 06:40 AM	#1
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	Lets see some then and now pics of rigs I'll start because I'm bored . YJ shortly after getting it , already started trimming fenders , installed rock rails and front and rear bumpers . and a little later on with more tube and cutting . and now

10-20-2008, 10:13 AM	#2
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	ha, allt his work, and still nothing to wheel.... __________________

10-20-2008, 11:12 AM	#3
4RunnerAdam Join Date: Apr 2007 Location: near eastgate mall Posts: 171	Then...bone stock with a 3" body lift Now.....solid axle swap and 36" swampers Pulled the V6... Installed a V8 Had to hack the front up... How she is currently sitting.. __________________ 88 4Runner, 350 V8 swap in progress http://staff.4x4wire.com/adamf

10-20-2008, 01:58 PM	#4
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	here it is a year and a half ago when i got it. here is how it looked last trip to haspin should be alot more dented and banged up after this week. greg __________________ zuk buggy.....it'll be a jeep eventually.

10-20-2008, 10:09 PM	#7
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	it looks like a side by side. __________________

10-20-2008, 02:29 PM	#5
blazerbrad - CORE Member - Join Date: Feb 2007 Posts: 831 Images: 6	My '90 that I bought in '94 with about 49k on the ticker. It was completely stock except for a set of 32" mud tires...don't have any digital pics of it completely stock. Crappy scanned pic from the Lima 4 Wheel Jamboree about '98 or '99. 4" lift, 33" tires, and 10-bolts with 4.10 gears and limited slips front and rear. Next step was a welded 14-bolt rear, converted the front 10-bolt to 8-lug (had the limited slip) and 35" MT/R's (no pictures on this PC). Next big step was a D60 front with a Lock-right and 13/38-16 Swampers. Body was still reasonably straight, but this setup got me into lots of trouble. Current setup. 39.5" Swampers, full cage, 3x3 rockers, custom front and rear bumpers, winch, hydro-assist, added a 3rd seat for my son in the back (the kid in the front is a buddy's son).

10-20-2008, 09:05 PM	#6
maddhatter Join Date: May 2007 Location: loveland OH Posts: 324	Meet FLIPPER. Before After. It's not "done" yet but it's came a long way so far. I hope to give it a good test run at Zuk spook.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode