front & rear bumper

Bear Chow · 02-10-2009, 01:13 PM

I'm going to take a stab at making simple square tube front and rear bumpers with 3" hitch. How thick should the tube be without being overkill?

Thanks

Paul

maddhatter · 02-10-2009, 03:45 PM

What size tubing?

1/4" wall is heavy but strong.

Bear Chow · 02-10-2009, 03:56 PM

I was planning a trip to the scrap yard to see what I can find. 2x3 3x3 2x4 I thought 1/4" might be on the excessive side. So I figured, I would see what a typical thickness would be.

KargoMaster · 02-10-2009, 04:23 PM

<---- big fan of 1/4" wall or greater...

but I know I'm strange...

maddhatter · 02-10-2009, 05:44 PM

A pretty good rule is, Pick it up if it's not heavy ass hell? Find one that is!

GPER · 02-10-2009, 08:34 PM

3/16 works well and there is a special receiver hitch stock that doesn't have a seam inside of it. It is pricey but a foot will make two hitches.

02-10-2009, 01:13 PM	#1
Bear Chow Jeepless Join Date: Feb 2007 Location: Oxford, Oh Posts: 302	front & rear bumper I'm going to take a stab at making simple square tube front and rear bumpers with 3" hitch. How thick should the tube be without being overkill? Thanks Paul

02-10-2009, 04:23 PM	#4
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	<---- big fan of 1/4" wall or greater... but I know I'm strange... __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-10-2009, 03:45 PM	#2
maddhatter Join Date: May 2007 Location: loveland OH Posts: 324	What size tubing? 1/4" wall is heavy but strong.

02-10-2009, 03:56 PM	#3
Bear Chow Jeepless Join Date: Feb 2007 Location: Oxford, Oh Posts: 302	I was planning a trip to the scrap yard to see what I can find. 2x3 3x3 2x4 I thought 1/4" might be on the excessive side. So I figured, I would see what a typical thickness would be.

02-10-2009, 05:44 PM	#5
maddhatter Join Date: May 2007 Location: loveland OH Posts: 324	A pretty good rule is, Pick it up if it's not heavy ass hell? Find one that is!

02-10-2009, 08:34 PM	#6
GPER Join Date: Feb 2007 Location: Kettering, Ohio Posts: 811	3/16 works well and there is a special receiver hitch stock that doesn't have a seam inside of it. It is pricey but a foot will make two hitches.