Driveshaft shop

RD TRCTR · 06-10-2009, 11:15 PM

Does anyone know of a good, reputable drive shaft shop?

Putting another t-case in a 'Yota and need to lengthen the front and shorten the rear.

TIA

Hope Springs Hauler · 06-10-2009, 11:22 PM

Republic diesel can do it if it is a standard size.

4RunnerAdam · 06-10-2009, 11:23 PM

I had my shaft done at Cincinnati Driveline downtown cincy

98gp · 06-11-2009, 12:26 PM

I used Republic Diesel too. Had them cut an XJ front driveshaft down for the rear driveshaft on my TJ after I installed a JB Short Fixed Yoke.

KargoMaster · 06-11-2009, 02:33 PM

X3 for Republic Diesel... Brian is who I always ask for...

Coppertop · 06-11-2009, 06:49 PM

Drivetrain Specialists has always done a good job for me.

They use spicer parts.. 513-874-3680

Nick

fabricator · 06-11-2009, 09:42 PM

always done my own
6.5 inches on the crawler box i believe

MrShoeBoy · 06-15-2009, 11:07 AM

I used Republic Diesel to repair my rear shaft in my MJ. The repair ended up being a brand new shaft (It was really trashed). Great work and it cost less than the origional shaft

I will go back when my front shaft needs some work.

AARON

KennyTJ · 06-18-2009, 11:49 AM

Quote:

Originally Posted by Coppertop

Drivetrain Specialists has always done a good job for me.

They use spicer parts.. 513-874-3680

Nick

X2 these guys do good work!

06-10-2009, 11:15 PM	#1
RD TRCTR Join Date: Nov 2007 Location: Troy, OH Posts: 94	Driveshaft shop Does anyone know of a good, reputable drive shaft shop? Putting another t-case in a 'Yota and need to lengthen the front and shorten the rear. TIA

06-10-2009, 11:22 PM	#2
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	Republic diesel can do it if it is a standard size. __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

06-10-2009, 11:23 PM	#3
4RunnerAdam Join Date: Apr 2007 Location: near eastgate mall Posts: 171	I had my shaft done at Cincinnati Driveline downtown cincy __________________ 88 4Runner, 350 V8 swap in progress http://staff.4x4wire.com/adamf

06-11-2009, 02:33 PM	#5
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	X3 for Republic Diesel... Brian is who I always ask for... __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

06-11-2009, 06:49 PM	#6
Coppertop XJWHEELING Join Date: Nov 2007 Location: Colerain Township Posts: 837	Drivetrain Specialists has always done a good job for me. They use spicer parts.. 513-874-3680 Nick __________________ Just a 200 dollar cherokee that wouldn't start .. Ten years later same chrome grille ..

06-11-2009, 12:26 PM	#4
98gp Join Date: Apr 2007 Location: Ohio Posts: 1	I used Republic Diesel too. Had them cut an XJ front driveshaft down for the rear driveshaft on my TJ after I installed a JB Short Fixed Yoke.

06-11-2009, 09:42 PM	#7
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	always done my own 6.5 inches on the crawler box i believe __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

06-15-2009, 11:07 AM	#8
MrShoeBoy Join Date: Dec 2007 Location: Cincinnati Posts: 120	I used Republic Diesel to repair my rear shaft in my MJ. The repair ended up being a brand new shaft (It was really trashed). Great work and it cost less than the origional shaft I will go back when my front shaft needs some work. AARON __________________ 91 MJ Under construction

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode