cherokee blower motor

77k10 · 10-23-2009, 01:51 PM

Anyone ever replace a blower motor in a newer cherokee.... i have a 2000 and the heat and air do not work.... was told the blower motor needs replaced. Any help would be appreciated

Flxratd · 10-23-2009, 02:21 PM

it makes a difference if its a regular or grand. the grand is easy under the dash 3 screws unplug the connector and your good. if its a sport its under the hood and they (alldata) are saying that the a.c. will need to be evacuated to relocate the rec/dryer to give you room to remove the blower motor. if that is the case grab a test light and make sure you have power at the blower motor if not check the fuse then the blower resister. if anyone has done this and the a.c. does not have to be evacuated please chime in as i have not personally done this and am going by what alldata says.

Coppertop · 10-23-2009, 02:42 PM

Sorry I'm not sure on the 2000..Just went and looked at my son's 99. Sure enough like Scott said the a/c receiver dryer is mounted in the way.. You may try and unbolt the mount and turn the dryer up to clear it.

I looked on NAXJA this was all I could find. Worth reading http://www.naxja.org/forum/showthrea...r+motor&page=2

Good Luck

Nick

77k10 · 10-23-2009, 08:53 PM

my bad it is a xj...... that sucks... and if anyone wants to make some money replacing some ball joints give me a call at 859 250 9560.... not really able to do any work right now. thanks!

Coppertop · 10-24-2009, 10:11 AM

I'm interested... Will give you a call.

Nick

Trigger · 10-24-2009, 07:05 PM

Before you go and replace the motor, make sure it's not the speed control relay. I just had to replace mine because it would only blow on high.

10-23-2009, 01:51 PM	#1
77k10 Join Date: May 2008 Location: ft thomas Posts: 24	cherokee blower motor Anyone ever replace a blower motor in a newer cherokee.... i have a 2000 and the heat and air do not work.... was told the blower motor needs replaced. Any help would be appreciated

10-23-2009, 02:21 PM	#2
Flxratd Retired Join Date: May 2008 Location: Hamilton/Ross Posts: 645	it makes a difference if its a regular or grand. the grand is easy under the dash 3 screws unplug the connector and your good. if its a sport its under the hood and they (alldata) are saying that the a.c. will need to be evacuated to relocate the rec/dryer to give you room to remove the blower motor. if that is the case grab a test light and make sure you have power at the blower motor if not check the fuse then the blower resister. if anyone has done this and the a.c. does not have to be evacuated please chime in as i have not personally done this and am going by what alldata says. __________________ One of these days Zuk 2.0

10-23-2009, 02:42 PM	#3
Coppertop XJWHEELING Join Date: Nov 2007 Location: Colerain Township Posts: 837	Sorry I'm not sure on the 2000..Just went and looked at my son's 99. Sure enough like Scott said the a/c receiver dryer is mounted in the way.. You may try and unbolt the mount and turn the dryer up to clear it. I looked on NAXJA this was all I could find. Worth reading http://www.naxja.org/forum/showthrea...r+motor&page=2 Good Luck Nick __________________ Just a 200 dollar cherokee that wouldn't start .. Ten years later same chrome grille ..

10-24-2009, 10:11 AM	#5
Coppertop XJWHEELING Join Date: Nov 2007 Location: Colerain Township Posts: 837	I'm interested... Will give you a call. Nick __________________ Just a 200 dollar cherokee that wouldn't start .. Ten years later same chrome grille ..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-23-2009, 08:53 PM	#4
77k10 Join Date: May 2008 Location: ft thomas Posts: 24	my bad it is a xj...... that sucks... and if anyone wants to make some money replacing some ball joints give me a call at 859 250 9560.... not really able to do any work right now. thanks!

10-24-2009, 07:05 PM	#6
Trigger Join Date: Mar 2007 Location: Xenia, OH Posts: 281	Before you go and replace the motor, make sure it's not the speed control relay. I just had to replace mine because it would only blow on high.