What are these called?

biggin69 · 12-14-2009, 08:39 PM

What is the name of these mounts? I am trying to find the cheapest place to pic them up. Thanks!

JeffK5 · 12-14-2009, 08:57 PM

I believe they're called "builder bushings"

redcj3a · 12-14-2009, 09:12 PM

I have two (2) sets of these you can have for $15. Don't really remember where I bought them, possibly DIY4X.com Did not use them for what I had planned.

Tubing is 2" od, 1.5" id, 2.5" long. The zerk fitting on these are on the end of the bolt, not on the tubing wall like in your photo.

I'm in Middletown.

John

KargoMaster · 12-14-2009, 09:44 PM

http://diy4x.com/cart/index.php?rout...product_id=130

Fabricator's set (type 2 moved the zirk as John noted)... the image above is certainly from DIY4X...

I'll take them if biggin doesn't want them.

When did Kert upgrade the website... ???

biggin69 · 12-14-2009, 09:58 PM

Quote:

Originally Posted by redcj3a

I have two (2) sets of these you can have for $15. Don't really remember where I bought them, possibly DIY4X.com Did not use them for what I had planned.

Tubing is 2" od, 1.5" id, 2.5" long. The zerk fitting on these are on the end of the bolt, not on the tubing wall like in your photo.

I'm in Middletown.

John

You have a PM.

Hope Springs Hauler · 12-15-2009, 09:30 AM

Ruffstuff has them also. They are listed as "bushed DOM Sleeve"

humpy · 12-15-2009, 11:55 AM

ballistic fab has em

12-14-2009, 08:39 PM	#1
biggin69 Really??? Join Date: Sep 2009 Location: Cincy Posts: 678	What are these called? What is the name of these mounts? I am trying to find the cheapest place to pic them up. Thanks! Attached Images

12-14-2009, 09:12 PM	#3
redcj3a Join Date: Jan 2007 Location: Middletown Posts: 118	I have two (2) sets of these you can have for $15. Don't really remember where I bought them, possibly DIY4X.com Did not use them for what I had planned. Tubing is 2" od, 1.5" id, 2.5" long. The zerk fitting on these are on the end of the bolt, not on the tubing wall like in your photo. I'm in Middletown. John __________________ 1950 CJ3A. Oddfire 225 V6, T-86 transmission, Dana 18 transfer case, 4 wheel disc brakes, locked front and rear. Manual saginaw steering. Warn winch, 9,000#. Last edited by redcj3a; 12-14-2009 at 09:34 PM.

12-14-2009, 09:44 PM	#4
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	http://diy4x.com/cart/index.php?rout...product_id=130 Fabricator's set (type 2 moved the zirk as John noted)... the image above is certainly from DIY4X... I'll take them if biggin doesn't want them. When did Kert upgrade the website... ??? __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

12-15-2009, 09:30 AM	#6
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	Ruffstuff has them also. They are listed as "bushed DOM Sleeve" __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-14-2009, 08:57 PM	#2
JeffK5 Tiny Member Join Date: Jan 2007 Location: Colerain Posts: 798	I believe they're called "builder bushings"

12-15-2009, 11:55 AM	#7
humpy Join Date: Sep 2008 Posts: 573	ballistic fab has em