Please vote for me!! Top Truck 2010 #11

carwash · 02-12-2010, 11:54 PM

Got my issue of Four Wheeler in the mail today, and I'm in the top 50 rigs for voting for the Top Truck Challenge this year... it is very cool to see my rig in a mag... even if it is my tiny little poser shot. If i get lucky enough to get voted in, it would be the pinnacle of my wheeling career up this point. I have heard so many amazing things about the event, would be an honor to be a part of it.

My rig is #11... please gimme yer vote! The shot is a super poser shot before it ever hit the trail, but it's beat a bit now... not quite a virgin anymore... Here's a couple better shots...

Rear steer and cromo shafts happening this week...

There is no online voting. You actually have to purchase the mag, cut out the ballot and mail it in. It may be a pain in the ass, but i would greatly appreciate any votes you guys can throw my way!! I will represent the tri-state very well, i promise!

thanks in advance!!!

hardluck · 02-13-2010, 12:13 AM

I just seen this myself and was getting on here to post something about it and here you are pimping yourself out.

Good Luck, you got my vote.

yellowjacket · 02-13-2010, 12:16 AM

you got it, man!
I cant believe your willing to trash your rig at ttc, but i guess its for a worthy cause...... if your gonna go, go big, right?

BIGRAM · 02-13-2010, 12:17 AM

You'll get my vote.

Good luck and TRASH-IT like you stole it!!!

carwash · 02-13-2010, 12:21 AM

i will make sure to put on a good show... and please, take the time to buy a mag and mail in a ballot. Post up when you mail it off, so i can keep my hopes up!

Thanks!!!

yjflop · 02-13-2010, 01:50 AM

you have my vote. very very nice rig

riegel · 02-13-2010, 02:06 AM

sent it today.i put you down.hope the green taco kicks your ass.lol just kidding good luck

fabricator · 02-13-2010, 02:39 AM

so
wtf u gotta do to vote?

fabricator · 02-13-2010, 02:40 AM

done

carwash · 02-13-2010, 02:41 AM

Gotta buy the new issue of Four Wheeler, cut out the ballot, fill it out and mail it in.

fabricator · 02-13-2010, 02:59 AM

Horse****
u gonna owe me one

carwash · 02-13-2010, 03:00 AM

you name it, it's worth a vote or two to me man.

mckeddie · 02-14-2010, 11:26 PM

i went to buy it today, some guy had just grabbed the last one. i told him if he was going to buy it he better mail in a vote for #11. he looked at me funny. i'm going to try a couple other stores tommorrow.

JeffK5 · 04-21-2010, 10:20 PM

One thing off the list.. a little rear steer pron!

carwash · 04-21-2010, 10:28 PM

Sweet, thanks man.

Ha, you left that bearing off there... I need to hit the HF and get me a new bearing block and puller... mine has disappeared.

Wont be using that bearing and need to replace that seal that's behind it as well. Using the hubs off the current axle, as I know they work well.

94Dodge Truggy · 05-11-2010, 02:16 PM

Hey post up a pic of the improved tire and axle combo for the Carwash voters. Got enough motor for the event with the new unsprung weight?

carwash · 05-11-2010, 02:51 PM

Still waiting on wheels... Staz is known to not be the fastest working man in the biz... But here are some pics of stuff going on right now....

Rear steer all but buttoned down and done. These pics are a couple days old, so stuff is further along than this. I'm hammering about 15 hours a day on the rig now.

Is this bad?

Here be the tires

carwash · 05-11-2010, 02:51 PM

and yeah, motor should be fine... i have gearing for days.

02-13-2010, 12:13 AM	#2
hardluck Poor Bastard Join Date: Jan 2007 Location: Lynchburg, OH Posts: 189	I just seen this myself and was getting on here to post something about it and here you are pimping yourself out. Good Luck, you got my vote. __________________ if you can't fit it....FORCE IT!!!!!!!!!

02-13-2010, 12:17 AM	#4
BIGRAM Ready to Wheel!!!!!!! Join Date: Jul 2009 Location: Stanton, KY Posts: 263	You'll get my vote. Good luck and TRASH-IT like you stole it!!! __________________ 1994 Dodge Ram 5.9L SWB 3/4 axles, 39.5 IROKS, HYDRO assist

02-13-2010, 12:21 AM	#5
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	i will make sure to put on a good show... and please, take the time to buy a mag and mail in a ballot. Post up when you mail it off, so i can keep my hopes up! Thanks!!! __________________

02-13-2010, 02:39 AM	#8
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	so wtf u gotta do to vote? Attached Images __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

02-13-2010, 02:40 AM	#9
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	done __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

02-12-2010, 11:54 PM	#1
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	Please vote for me!! Top Truck 2010 #11 Got my issue of Four Wheeler in the mail today, and I'm in the top 50 rigs for voting for the Top Truck Challenge this year... it is very cool to see my rig in a mag... even if it is my tiny little poser shot. If i get lucky enough to get voted in, it would be the pinnacle of my wheeling career up this point. I have heard so many amazing things about the event, would be an honor to be a part of it. My rig is #11... please gimme yer vote! The shot is a super poser shot before it ever hit the trail, but it's beat a bit now... not quite a virgin anymore... Here's a couple better shots... Rear steer and cromo shafts happening this week... There is no online voting. You actually have to purchase the mag, cut out the ballot and mail it in. It may be a pain in the ass, but i would greatly appreciate any votes you guys can throw my way!! I will represent the tri-state very well, i promise! thanks in advance!!! __________________

02-13-2010, 12:16 AM	#3
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	you got it, man! I cant believe your willing to trash your rig at ttc, but i guess its for a worthy cause...... if your gonna go, go big, right?

02-13-2010, 01:50 AM	#6
yjflop Join Date: Jan 2010 Posts: 8	you have my vote. very very nice rig

02-13-2010, 02:06 AM	#7
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	sent it today.i put you down.hope the green taco kicks your ass.lol just kidding good luck

02-13-2010, 02:41 AM	#10
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	Gotta buy the new issue of Four Wheeler, cut out the ballot, fill it out and mail it in. __________________

02-13-2010, 02:59 AM	#11
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	Horse**** u gonna owe me one __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

02-13-2010, 03:00 AM	#12
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	you name it, it's worth a vote or two to me man. __________________

02-14-2010, 11:26 PM	#13
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	i went to buy it today, some guy had just grabbed the last one. i told him if he was going to buy it he better mail in a vote for #11. he looked at me funny. i'm going to try a couple other stores tommorrow. __________________ zuk buggy.....it'll be a jeep eventually.

04-21-2010, 10:20 PM	#14
JeffK5 Tiny Member Join Date: Jan 2007 Location: Colerain Posts: 798	One thing off the list.. a little rear steer pron! Attached Thumbnails

04-21-2010, 10:28 PM	#15
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	Sweet, thanks man. Ha, you left that bearing off there... I need to hit the HF and get me a new bearing block and puller... mine has disappeared. Wont be using that bearing and need to replace that seal that's behind it as well. Using the hubs off the current axle, as I know they work well. __________________

05-11-2010, 02:16 PM	#16
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Hey post up a pic of the improved tire and axle combo for the Carwash voters. Got enough motor for the event with the new unsprung weight? __________________

05-11-2010, 02:51 PM	#17
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	Still waiting on wheels... Staz is known to not be the fastest working man in the biz... But here are some pics of stuff going on right now.... Rear steer all but buttoned down and done. These pics are a couple days old, so stuff is further along than this. I'm hammering about 15 hours a day on the rig now. Is this bad? Here be the tires __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode