|
|
06-20-2010, 11:32 PM
|
#1 |
|
Pure Bacon
Join Date: Jan 2007
Location: Trenton, Oh
Posts: 1,098
|
It's Dead !!!!
Took the Jimmy out for it's maiden trip in the woods ..... Did great , even with crap shocks on it , the ride was very smooth even in the creek at speed. only problem was front drive shaft doesn't have enough slip and I think I popped it out about 10 times
 . That was the good !!!!! the bad was on the way back up the creek I got in some deep water  and I developed a slight miss , I got it out of the water and had it on the rev-limiter trying to clean it out ..... and BANG !!!! popped my 4.3 :mad: ..... thought I got water in it, but once we got it home it appears my mystery knock that I thought was a flywheel .... was not ! no water in oil and no water in the intake box. Going to start pulling the doner motor in the morning ! got a few pics waiting , will post soon . |
|
|
|
06-21-2010, 09:34 AM
|
#2 |
|
On XJ 2 Now
Join Date: Feb 2007
Location: Fairfield Twp.
Posts: 314
 |
Playing out in your favorite place? I guess Scott has another motor for you?
__________________
88 XJ - 5" lift - 35" BFG's - Bumpers - Rock Rails - Homebrewed OBA - Roof Rack - Tube Doors - Trimmed - Dented 87 XJ - D44 - Disco D30 - 235's - 231TC - Stock for now |
|
|
|
|
06-21-2010, 03:54 PM
|
#3 | |
|
Pure Bacon
Join Date: Jan 2007
Location: Trenton, Oh
Posts: 1,098
|
Quote:
Yes and Yes ! he was with me
|
|
|
|
|
|
06-21-2010, 04:04 PM
|
#4 | |
|
On XJ 2 Now
Join Date: Feb 2007
Location: Fairfield Twp.
Posts: 314
|
Quote:
I need to go down there one time with you. Never been but heard a lot about it.
__________________
88 XJ - 5" lift - 35" BFG's - Bumpers - Rock Rails - Homebrewed OBA - Roof Rack - Tube Doors - Trimmed - Dented 87 XJ - D44 - Disco D30 - 235's - 231TC - Stock for now Last edited by RuffedUpXJ; 06-21-2010 at 04:09 PM. |
|
|
|
|
|
06-21-2010, 06:00 PM
|
#5 |
Join Date: Feb 2008
Location: middletown,oh
Posts: 508
|
If you need any cheap/free 4.3 parts I have 2 sitting here in pieces. One is a '98 and the other is a '99. The only differance I found so far is the starter bolts and bell housing bolts are standard thread on the 98 and metric on the 99.
|
|
|
|
|
06-21-2010, 07:49 PM
|
#6 | |
|
Pure Bacon
Join Date: Jan 2007
Location: Trenton, Oh
Posts: 1,098
|
Quote:
You got a bottom end thats good ? mines a 99 |
|
|
|
|
|
06-21-2010, 11:46 AM
|
#7 |
|
anywhere but there
Join Date: Jan 2007
Location: Blanchester, Oh
Posts: 174
|
that didn't take long....
__________________
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
