5.3 chevy, auto setup

94Dodge Truggy · 12-02-2010, 01:39 PM

Anyone know of a 5.3 chevy motor with auto trans. and a plug n play wiring harness for sale? Or know how to acquire a harness and computer built to run in a jeep? Looking at some possibilities for something in the future and know the 5.3 is a good power to weight option. Thanks, Scott

jwend · 12-02-2010, 01:48 PM

I was talking to Carwash about a take out 5.3 the other day... hit him up the guy may still have it

sarge · 12-02-2010, 08:20 PM

Scott , check R&D on Yankee Rd. in Middletown . I was there the other day and was talking to the parts guy and he acted like he couldn't give the 4.8,5.3 and 6.0 platforms away because people just are not having problems out of them and they are lasting forever. I didn't ask prices but it sounded like you could get one cheap.

94Dodge Truggy · 12-03-2010, 07:34 AM

Wondering who out there makes a harness for these that will adapt into anything easily as someone must due to many of these making their way into offroad rigs.

humpy · 12-03-2010, 09:05 AM

i have a business card for a guy in missouri...for 300 bucks you send him your harness and he will build you a buggy harness basically and reflash the computer....let me find his card today and ill send you the number...

94Dodge Truggy · 12-03-2010, 11:20 AM

Quote:

Originally Posted by humpy

i have a business card for a guy in missouri...for 300 bucks you send him your harness and he will build you a buggy harness basically and reflash the computer....let me find his card today and ill send you the number...

Sweet! Thanks! Painless wiring is supposed to get back with me on a harness as well. They did the harness that was in the jeep I had with the 8.1.

gothodgie · 12-03-2010, 03:40 PM

Quote:

Originally Posted by 94Dodge Truggy

Anyone know of a 5.3 chevy motor with auto trans. and a plug n play wiring harness for sale? Or know how to acquire a harness and computer built to run in a jeep? Looking at some possibilities for something in the future and know the 5.3 is a good power to weight option. Thanks, Scott

i am sure you are not building a Landcrusier, but there is a whole lot of info and part sources on here http://forum.ih8mud.com/60-series-wagons/... just search 5.3 chevy... there are a ton of fj60's with 5.3's in them out west...

Trigger · 12-03-2010, 06:28 PM

Valley Auto in Dayton has a complete 5.3 still in the truck for $650. They told me that if someone were to pull it, they could have the computer and wiring harness for another $150.

94Dodge Truggy · 12-03-2010, 10:36 PM

Quote:

Originally Posted by Trigger

Valley Auto in Dayton has a complete 5.3 still in the truck for $650. They told me that if someone were to pull it, they could have the computer and wiring harness for another $150.

what year was it? Do not want drive by wire.

Trigger · 12-04-2010, 08:26 AM

Quote:

Originally Posted by 94Dodge Truggy

what year was it? Do not want drive by wire.

I'm not sure. Here is their information if you want to give them a call. Pretty good folks to work with.

Valley Auto Parts

1800 Valley Street
Dayton, OH 45404-2218
(937) 228-6000

ThePeanutsGang · 12-04-2010, 12:21 PM

For your wiring harness you may also want to check with these guys: http://www.centechwire.com/
I have used Painless, Ron Francis and by far Centech is the best as far as quality and ease of installation

12-02-2010, 01:39 PM	#1
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	5.3 chevy, auto setup Anyone know of a 5.3 chevy motor with auto trans. and a plug n play wiring harness for sale? Or know how to acquire a harness and computer built to run in a jeep? Looking at some possibilities for something in the future and know the 5.3 is a good power to weight option. Thanks, Scott __________________ Last edited by 94Dodge Truggy; 12-02-2010 at 01:57 PM.

12-02-2010, 01:48 PM	#2
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	I was talking to Carwash about a take out 5.3 the other day... hit him up the guy may still have it __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

12-03-2010, 07:34 AM	#4
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Wondering who out there makes a harness for these that will adapt into anything easily as someone must due to many of these making their way into offroad rigs. __________________

12-04-2010, 12:21 PM	#11
ThePeanutsGang Join Date: Jun 2008 Location: west alexandria Posts: 9	For your wiring harness you may also want to check with these guys: http://www.centechwire.com/ I have used Painless, Ron Francis and by far Centech is the best as far as quality and ease of installation __________________ If you can't fix it with a hammer,you have an electrical problem

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-02-2010, 08:20 PM	#3
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	Scott , check R&D on Yankee Rd. in Middletown . I was there the other day and was talking to the parts guy and he acted like he couldn't give the 4.8,5.3 and 6.0 platforms away because people just are not having problems out of them and they are lasting forever. I didn't ask prices but it sounded like you could get one cheap.

12-03-2010, 09:05 AM	#5
humpy Join Date: Sep 2008 Posts: 573	i have a business card for a guy in missouri...for 300 bucks you send him your harness and he will build you a buggy harness basically and reflash the computer....let me find his card today and ill send you the number...

12-03-2010, 06:28 PM	#8
Trigger Join Date: Mar 2007 Location: Xenia, OH Posts: 281	Valley Auto in Dayton has a complete 5.3 still in the truck for $650. They told me that if someone were to pull it, they could have the computer and wiring harness for another $150.