|
12-05-2010, 12:11 PM | #1 |
XJWHEELING
Join Date: Nov 2007
Location: Colerain Township
Posts: 837
|
Project Coppertop Axle Swap
Picked up some axles yesterday.Even with the snow falling and the ground a snow/muddy mess ,I manage to cut the axles out.
Dana 44 front and Dana 60 rear out of a 1979 F250. Paid 300.00 :) Now ,let the adventure begin..... Nick
__________________
Just a 200 dollar cherokee that wouldn't start .. Ten years later same chrome grille .. |
12-05-2010, 03:00 PM | #2 |
Cleaning off the rust...
Join Date: Jan 2007
Location: Cincinnati, OH
Posts: 1,009
|
nice... I bet you'll sure miss those 7 minute Dana30 axle changes, won't you?
__________________
brad 5.0L | 435 | 203 | 300 | 4.10 | 39.5 Buildup BACK underway... |
12-05-2010, 03:11 PM | #3 |
Join Date: Nov 2009
Location: Delhi Ohio
Posts: 19
|
Great deal on the axles....hopefully by spring I'll be doing my yj.I'll be following this one for sure
|
12-05-2010, 07:21 PM | #5 | |
XJWHEELING
Join Date: Nov 2007
Location: Colerain Township
Posts: 837
|
Quote:
For sure,Already been researching..Thinking bout these... http://bluetorchfab.com/store/advanc...42u0&x=10&y=11 The build sheet is in the works. Nick
__________________
Just a 200 dollar cherokee that wouldn't start .. Ten years later same chrome grille .. |
|
12-05-2010, 07:22 PM | #6 |
Join Date: Mar 2008
Posts: 188
|
lky13blazer...if you are going to do the same to yours then i have a '79 ford rearend that you will want. $100.00 and it's yours. it is complete.
__________________
95 yj, fresh fuel injected 302, c-6, twin sticked 205, 3 linked high pinion d60 front, double trianulated 4 linked 14 bolt rear (all aluminum links) locked both ends, 4:56 gears, full hydro steering, high steer, 4 wheel discs, 16" 2.5 fox air shocks, 39.5" irok's. just finishing a full frame-up redo thanks to a great friend and one knowledgable(sp?) s.o.b casey cravens for without him this could not have been done in such a short time and done right! LOOK OUT "WHITEY" HERE I COME!!! |
12-05-2010, 11:15 PM | #7 |
Join Date: Nov 2009
Location: Delhi Ohio
Posts: 19
|
thanks I'll keep it in mind but it will be at least after the first of the year before i get to...do you know the gear ratio? and bolt pattern?
|
Thread Tools | |
Display Modes | |
|
|