|
|
03-14-2011, 02:52 PM
|
#1 |
Join Date: Nov 2008
Posts: 35
|
Help with Axle ID
Trying to figure out what axle is in a Geo Tracker I'm working on. Owner knows nothing about it or it's history. It is running toyota CV shafts, I picked up a junkyard tracker front diff but it is not the same. Very close but not it. Any toyota guys that can help me out. The drivers side Inner axleshaft is bent.
Thanks |
|
|
|
03-14-2011, 08:37 PM
|
#2 |
Join Date: Feb 2007
Location: New Richmond Ohio
Posts: 266
|
Not all trackers are the same. What is the spline count on the one you have?
|
|
|
|
|
03-14-2011, 08:54 PM
|
#3 |
|
Join Date: Nov 2008
Posts: 35
|
26 spline in the axle that is in it now. door tag reads 93 tracker.
the axle I got from a junkyard "93 tracker" is 21 spline. |
|
|
|
|
03-14-2011, 09:33 PM
|
#4 |
|
Join Date: Feb 2007
Location: New Richmond Ohio
Posts: 266
|
Could it be one of Mikes???
http://www.zukiworld.com/month_02010...swithhagen.htm |
|
|
|
|
03-14-2011, 09:46 PM
|
#5 |
|
Join Date: Nov 2008
Posts: 35
|
Not sure? The housing is aluminum, you can see the mount broke from the housing and has been welded back. I thought it looked like this one, Rear toy 4cyl 8". It is running toy cv shafts and 3 to 5 bolt adapters between them.
|
|
|
|
|
03-14-2011, 09:51 PM
|
#6 |
|
Join Date: Nov 2008
Posts: 35
|
Also, it did have the strap over it like he show's on the zukiworld site.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
