welding a winch plate?

tjrider · 12-31-2011, 10:07 AM

So I picked up a smittybuilt plate for the tj. Problem is it sticks out way past my framerails. I'm not running a front swaybar so I have open real estate in front of the grille. About 3". Can I just slide the plate back on the frame and weld it on? I want the winch as tight as I can get against the grille

Coppertop · 12-31-2011, 10:16 AM

Why not bolt it in place instead of welding.As long as it bolted to the frame you should be fine.

Nick
WHO-DEY

12-31-2011, 10:07 AM	#1
tjrider Join Date: May 2009 Location: fairfield Posts: 320	welding a winch plate? So I picked up a smittybuilt plate for the tj. Problem is it sticks out way past my framerails. I'm not running a front swaybar so I have open real estate in front of the grille. About 3". Can I just slide the plate back on the frame and weld it on? I want the winch as tight as I can get against the grille __________________ If you don't want it broke, don't let me drive it....

12-31-2011, 10:16 AM	#2
Coppertop XJWHEELING Join Date: Nov 2007 Location: Colerain Township Posts: 837	Why not bolt it in place instead of welding.As long as it bolted to the frame you should be fine. Nick WHO-DEY __________________ Just a 200 dollar cherokee that wouldn't start .. Ten years later same chrome grille ..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode