cj7 question

03-12-2012, 10:34 PM

Just wondering... my cj has the straight 6. I highly doubt this but I'm wondering if a 304 will bolt to my trans? Only asking cause I have a spankin new trans that has gears n. Super clutch basically its built for offroad only. But I want more power lol.

carwash · 03-12-2012, 10:50 PM

Will bolt right up. 258, 204, 360, 401, all same bolt pattern.

03-12-2012, 10:52 PM

Also my welder doesn't really have the balls to weld 1/8th inch to 1/4 steel to fix my frame. Its rusted out at the back leaf springs so if any one wants to make some money ill bring it buy n some cash to have some one weld in my plates.

03-12-2012, 10:55 PM

Ohhh noo wayy man I have a built 360 out of a drag car. It will bolt right up????

carwash · 03-12-2012, 10:56 PM

All AMC straight 6 and V8's have the same bell housing pattern.

KargoMaster · 03-12-2012, 11:12 PM

definitely same bolt pattern, but the engine mounts I'm not sure about...

03-13-2012, 12:28 AM

Yea motor mounted are different. I already have some.

JeffK5 · 03-13-2012, 02:47 PM

Quote:

Originally Posted by xplorer55

Ohhh noo wayy man I have a built 360 out of a drag car. It will bolt right up????

Any engine with "built" or "race" in the description will kill a D30/model20 .. Unless you have more in the drivetrain I'd stick with the 258.

fmlewis · 03-13-2012, 04:00 PM

I've got a 258 in my CJ7. It has the Weber Redline Carb, an aftermarket cam (but the guy I bought it from didn't know the specs of the cam he said Roy Carl did all the work), with an HEI. It makes some nice power. I do have a complete glass body though and I'm turning 35" boggers.

I will say running a 360 is a totally different animal. My brother did the same actually, took a 258 CJ7 Laredo and dropped a 360 in no problem. It was a beast. He did have to bend the headers a little to get them to fit properly but that was it.

carwash · 03-13-2012, 04:13 PM

A stock 360/304 has way less actual power than you think it does. Now if the motor is built out of some kind of racecar, that's a different story.

yellowjacket · 03-13-2012, 12:55 AM

carwash knows jeep stuff. hes been known to plate some frames as well

Sent from my LS670 using Tapatalk

carwash · 03-13-2012, 01:42 PM

Id be happy to give a quote on plating your frame, but i'd have to see it for sure.

03-12-2012, 10:34 PM	#1
xplorer55 Guest Posts: n/a	cj7 question Just wondering... my cj has the straight 6. I highly doubt this but I'm wondering if a 304 will bolt to my trans? Only asking cause I have a spankin new trans that has gears n. Super clutch basically its built for offroad only. But I want more power lol.

03-12-2012, 10:50 PM	#2
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	Will bolt right up. 258, 204, 360, 401, all same bolt pattern. __________________

03-12-2012, 10:56 PM	#5
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	All AMC straight 6 and V8's have the same bell housing pattern. __________________

03-12-2012, 11:12 PM	#6
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	definitely same bolt pattern, but the engine mounts I'm not sure about... __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

03-13-2012, 04:13 PM	#10
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	A stock 360/304 has way less actual power than you think it does. Now if the motor is built out of some kind of racecar, that's a different story. __________________

03-12-2012, 10:52 PM	#3
xplorer55 Guest Posts: n/a	Also my welder doesn't really have the balls to weld 1/8th inch to 1/4 steel to fix my frame. Its rusted out at the back leaf springs so if any one wants to make some money ill bring it buy n some cash to have some one weld in my plates.

03-12-2012, 10:55 PM	#4
xplorer55 Guest Posts: n/a	Ohhh noo wayy man I have a built 360 out of a drag car. It will bolt right up????

03-13-2012, 12:28 AM	#7
xplorer55 Guest Posts: n/a	Yea motor mounted are different. I already have some.

03-13-2012, 04:00 PM	#9
fmlewis The best damn Engineer!!! Join Date: Aug 2008 Location: Fairfield Posts: 135	I've got a 258 in my CJ7. It has the Weber Redline Carb, an aftermarket cam (but the guy I bought it from didn't know the specs of the cam he said Roy Carl did all the work), with an HEI. It makes some nice power. I do have a complete glass body though and I'm turning 35" boggers. I will say running a 360 is a totally different animal. My brother did the same actually, took a 258 CJ7 Laredo and dropped a 360 in no problem. It was a beast. He did have to bend the headers a little to get them to fit properly but that was it.

03-13-2012, 12:55 AM	#11
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	carwash knows jeep stuff. hes been known to plate some frames as well Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

03-13-2012, 01:42 PM	#12
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	Id be happy to give a quote on plating your frame, but i'd have to see it for sure. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode