|
|
04-10-2012, 12:56 PM
|
#1 |
|
Gearhead
Join Date: Mar 2008
Location: Anderson
Posts: 95
|
Who can bend 12/14ga. sheet?
I am planning a project that will need some sheet (12-14 ga.) bent along a 60" edge. (60"x60"x4" pan and 57"x57"x6" pan) I just need the bends and will weld it here. Also, don't need a pan break, but...
Any of the area steel yards do this? Any steel fab shops? Thanks. |
|
|
|
04-11-2012, 01:00 PM
|
#2 |
|
EX-Vice President
Join Date: Jan 2007
Location: Fairfield, Ohio
Posts: 3,048
 |
I can only go 52".
__________________
|
|
|
|
|
04-11-2012, 03:15 PM
|
#3 |
Join Date: Jan 2007
Location: Cincy, Oh
Posts: 947
|
Spring grove sheet metal
(513) 621-5584
__________________
For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it.... |
|
|
|
|
04-11-2012, 03:53 PM
|
#4 |
|
Gearhead
Join Date: Mar 2008
Location: Anderson
Posts: 95
|
Thanks!
|
|
|
|
|
04-11-2012, 05:54 PM
|
#6 |
|
Gearhead
Join Date: Mar 2008
Location: Anderson
Posts: 95
|
Thanks. Great info.
PS, Assuming this project goes through, I may hit you up for tube. 3x3x.25 and 2x2x.25 Do you do sheet as well? |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
