|
04-17-2012, 11:58 PM | #1 |
Join Date: Sep 2011
Posts: 40
|
60/2.5ton/rims
WILL TAKE $2000 FOR THE REST THAT I HAVE
1-2.5 steering repezza $700 complete 1-2.5 steering (narrowed complete w/steering ram mount)cleaned of everything $1000 1-2.5 rear cleaned of brackets and drums $250 1 complete set of 15" steel -(3/8")recentered rockwell pattern wheels $200 ALSO WILL TAKE $550 ON JEEP BUGGY CHASSIS Will make sweet deal on all Rockwell axles and rims located southeast side of Hillsboro Ohio contact Ryan 937-466-2393 Last edited by BadHabit; 05-22-2012 at 11:56 PM. |
05-02-2012, 11:50 PM | #2 |
Join Date: Sep 2011
Posts: 40
|
bump......
to the top, have a partial tubed out jeep YJ/CJ with title to sell also. If interested, I can post up some pics. Last edited by BadHabit; 05-07-2012 at 11:56 PM. |
05-03-2012, 11:43 PM | #4 | |
Join Date: Sep 2011
Posts: 40
|
Quote:
What do you have and I will see if he is interested? |
|
05-04-2012, 06:01 PM | #6 |
Join Date: Jun 2009
Location: Goshen
Posts: 336
|
Which yj/cj is being sold?
__________________
BYAAH!!! |
05-07-2012, 11:55 PM | #7 |
Join Date: Sep 2011
Posts: 40
|
Andy, the YJ/Cj is the one i use to wheel. I cut all the original tube work off and put new on and cut the frame off the front and double tubed it with higher clearance and 350 motor mounts. CJ grill chopped 4" @ the marker light location, grill is 1" thick now and is attached to hood. The seat area was cut out and redone along with the rear has more tubes than in picture.
|
05-07-2012, 11:56 PM | #8 |
Join Date: Sep 2011
Posts: 40
|
Chevy 60 sold!
|
05-08-2012, 11:38 PM | #9 |
Join Date: Jun 2009
Location: Goshen
Posts: 336
|
you dont happen to have any more of those grills do you?
I need one cut down like that or I need a regular one that Ill cut down myself.
__________________
BYAAH!!! |
Thread Tools | |
Display Modes | |
|
|