Haspin Saturday September 22nd

Runoveru2 · 09-04-2018, 08:09 PM

Anyone interested in a Haspin Trip on Saturday September 22nd ?

Post up if interested..

I will be going in my Rig
My boy will be going in his 1st Gen Yota
Jeff Pendergrass in 1 of his rigs of his choice
My boys friends in a couple Jeep Cherokees

Smiddy24 · 09-04-2018, 08:54 PM

Quote:

Originally Posted by Runoveru2

Anyone interested in a Haspin Trip on Saturday September 22nd ?

Post up if interested..

I will be going in my Rig
My boy will be going in his 1st Gen Yota
Jeff Pendergrass in 1 of his rigs of his choice
My boys friends in a couple Jeep Cherokees

I would, but the jeep will be completely torn apart and the front end of the fram will be chopped off.

WrenchMonkey · 09-05-2018, 03:38 PM

Hm, I'm a maybe. I have Rush Repairs to do, and my dad's birthday is in there sometime. Will update...

WrenchMonkey · 09-05-2018, 09:11 PM

Birthday is cleared. Steering linkage tonight/tomorrow. R&P this weekend hopefully. So the 22nd is looking pretty good.

Open invite, or trying to keep a handle on the group size?

Runoveru2 · 09-05-2018, 10:11 PM

Quote:

Originally Posted by WrenchMonkey

Open invite, or trying to keep a handle on the group size?

Open invite..
Fun for all,
If group is too big we can split it up,
We can put some beginners with experienced
Put some less capable with capable so no 1 is uneasy
Get some rounded up, you seem pretty good about that.

WrenchMonkey · 09-05-2018, 10:27 PM

Quote:

Originally Posted by Runoveru2

Get some rounded up, you seem pretty good about that.

Ha, sometimes TOO good!

itbrokeagain · 09-19-2018, 01:59 PM

I am planning on being there. Have a few very minor repairs to do still.

Sent from my SM-G935V using Tapatalk

WrenchMonkey · 09-20-2018, 11:16 AM

Unfortunately, I am out. I still don't have my front axle back, and now the Burban is down too.

I hope to get everything sorted out in time for the CORE Tour, but even that is a maybe at this point...

itbrokeagain · 09-20-2018, 11:17 AM

What happened to the burb?

Sent from my SM-G935V using Tapatalk

WrenchMonkey · 09-20-2018, 11:25 AM

All four brakes are dragging. Shop says the fluid has been contaminated at some point, and it attacked all the rubber in the system. Everything needs to be replaced and flushed $4000 for him to do it.

I can get calipers, hoses and a master for less than $500, but a new ABS module is like $1200. So, maybe I do everything else and hope, or try to find a used one...

Ky Mudhunter · 09-20-2018, 01:18 PM

Quote:

Originally Posted by WrenchMonkey

All four brakes are dragging. Shop says the fluid has been contaminated at some point, and it attacked all the rubber in the system. Everything needs to be replaced and flushed $4000 for him to do it.

I can get calipers, hoses and a master for less than $500, but a new ABS module is like $1200. So, maybe I do everything else and hope, or try to find a used one...

If it is just from contamination, you shouldn't need the entire ABS module. Just the valve body section. Not sure what year your Burb is but most of the valve modulators on Rockauto are under $500.

WrenchMonkey · 09-20-2018, 02:47 PM

We found one at Reitmans for $150, so I'll probably go that way... Thanks for the tip though.

Runoveru2 · 09-23-2018, 09:08 PM

Haspin Trip went very well,
Tony V managed to relocate his axle due to a broke center pin on the Drivers front very early into the Run, a little while later in the day Tony and a few repaired and he was able to get his rig back on the trail.
Other than that no damage as far as I know to anyone's rig.
The creek bed leading to the backbone with the waterfall ledges have been severely warn in from traffic and mother nature, it swallowed my 40's going down and was fun driving back up. Jeff Pendergrass on Tons and 42's took a bit to finally be able to to get up it. Before to long it's gonna require 40 + tires and skinny pedal with hopes and dreams to drive up it. We made our way around to different areas which seemed like at times ended us up in Lostville but was a good time no matter which way we turned. Thanks to all that showed up to wheel.

09-04-2018, 08:09 PM	#1
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	Haspin Saturday September 22nd Anyone interested in a Haspin Trip on Saturday September 22nd ? Post up if interested.. I will be going in my Rig My boy will be going in his 1st Gen Yota Jeff Pendergrass in 1 of his rigs of his choice My boys friends in a couple Jeep Cherokees __________________ No need for a Winch...You just have to make it !!

09-05-2018, 03:38 PM	#3
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Hm, I'm a maybe. I have Rush Repairs to do, and my dad's birthday is in there sometime. Will update... __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

09-05-2018, 09:11 PM	#4
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Birthday is cleared. Steering linkage tonight/tomorrow. R&P this weekend hopefully. So the 22nd is looking pretty good. Open invite, or trying to keep a handle on the group size? __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

09-19-2018, 01:59 PM	#7
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	I am planning on being there. Have a few very minor repairs to do still. Sent from my SM-G935V using Tapatalk __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

09-20-2018, 11:16 AM	#8
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Unfortunately, I am out. I still don't have my front axle back, and now the Burban is down too. I hope to get everything sorted out in time for the CORE Tour, but even that is a maybe at this point... __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

09-20-2018, 11:17 AM	#9
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	What happened to the burb? Sent from my SM-G935V using Tapatalk __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

09-20-2018, 11:25 AM	#10
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	All four brakes are dragging. Shop says the fluid has been contaminated at some point, and it attacked all the rubber in the system. Everything needs to be replaced and flushed $4000 for him to do it. I can get calipers, hoses and a master for less than $500, but a new ABS module is like $1200. So, maybe I do everything else and hope, or try to find a used one... __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

09-20-2018, 02:47 PM	#12
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	We found one at Reitmans for $150, so I'll probably go that way... Thanks for the tip though. __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

09-23-2018, 09:08 PM	#13
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	Haspin Trip went very well, Tony V managed to relocate his axle due to a broke center pin on the Drivers front very early into the Run, a little while later in the day Tony and a few repaired and he was able to get his rig back on the trail. Other than that no damage as far as I know to anyone's rig. The creek bed leading to the backbone with the waterfall ledges have been severely warn in from traffic and mother nature, it swallowed my 40's going down and was fun driving back up. Jeff Pendergrass on Tons and 42's took a bit to finally be able to to get up it. Before to long it's gonna require 40 + tires and skinny pedal with hopes and dreams to drive up it. We made our way around to different areas which seemed like at times ended us up in Lostville but was a good time no matter which way we turned. Thanks to all that showed up to wheel. __________________ No need for a Winch...You just have to make it !!