U&K metal works cnc plasma services

u&k metal works · 11-16-2011, 12:12 AM

Hey folks I'm now taking orders for all of your bracket and tab needs as well as DIY beadlocks and much more send me pm with questions and prices

gothodgie · 11-16-2011, 01:21 AM

where are u located ?

u&k metal works · 11-16-2011, 02:22 AM

Bainbridge Ohio about 19 miles east of Hillsboro

Moderator Edit: Bainbridge OH, 45612

u&k metal works · 11-16-2011, 04:28 PM

DIY beadlocks $200 for plain rings $225 for special order H1 rock rings $100 for a set of four. Get them just in time for Christmas

yellowjacket · 11-28-2011, 02:33 PM

bump for a good guy.

ive had copperhead fab cnc products before and the kerf quality is nowhere near as smooth as u&k kerf.

when i find some uncut h1 wheels ill be lookin for some rock rings from you zach.

Sent from my LS670 using Tapatalk

u&k metal works · 11-30-2011, 04:33 PM

Some of the new work from the shop

cheapthrills49 · 01-17-2012, 12:55 PM

Hey grilled cheese man, ;) do u have a program for H1 rings with 12 bolts or maybe half rounds

u&k metal works · 01-17-2012, 07:02 PM

I should if not I'll make one cheapthrill

u&k metal works · 02-11-2012, 06:24 PM

Name: ImageUploadedByTapatalk1328999010.394246.jpg
Views: 1081
Size: 33.5 KB

Name: ImageUploadedByTapatalk1328999038.480953.jpg
Views: 1066
Size: 32.7 KB

Name: ImageUploadedByTapatalk1328999064.097180.jpg
Views: 1081
Size: 32.2 KB

.
Some new stuff coming out of the shop

carwash · 02-12-2012, 11:46 AM

What tonnage is your break that makes your spring plates?

u&k metal works · 02-21-2012, 03:05 PM

I used a 20 ton press but have access to a 130 ton press what do you need bent??

cheapthrills49 · 04-03-2012, 07:57 AM

this thread needs a bump also.....zac does great work for deals!!!!

This is just some of the business I have done with him, well this is just what I have of his here now. I have also built 3 other trucks with his parts, tabs, and custom brackets i may need.......I have had him cut tabs/brackets for 2 buggys/jeeps another buddy of mine has built as well as just backhalfing another jeep last week.

he stays very busy and always comes through in the pinch, and is generaly always cheaper than any other tab co. out there and dont have to pay shipping and keep business local......well on that note its not so damn local lol but he works in mason and ships if you just cant work anything out.

check out the big CTO hunks of 1/4"........custom panhard brackets

cheapthrills49 · 04-03-2012, 08:08 AM

Flat bottom link tabs

long flat bottom shock-c/o tab

wrap around shock-c/o tab........NOTICE THE OFFSET HOLE SO THE SHOCK BODY CLEARS!

short rad. Tabs...double sheer belt tabs

cheapthrills49 · 04-03-2012, 08:16 AM

And dont forget your trick tic gussets!!!!!!!!!!!!!!!!!

frankensteinxj · 04-03-2012, 02:22 PM

Yo zach,
gonna need about 10 of those small trucker tabs for my link brackets and my panhard and whatever else they may get used on.
Also got a buddy that asked me if you could make a supersport SS emblem.
If you can cut an emblem like that out he needs it mto say SS GRILL,
He made a grill out of the front end of an el camino and needs a few emblems.
Let me know what youcan do, thanks bud.

u&k metal works · 04-08-2012, 01:42 PM

Thanks for the feedback fellers and yep I'll be at the IOK swap meet selling my goods hope to see y'all there

cheapthrills49 · 09-27-2012, 08:13 AM

Figure I'd give this thread a BIRTHDAY BUMP
HAPPY B-DAY ZAC !!!!!

U running any b-day specials and what's your plan for the fall swap meet @ IOK?

u&k metal works · 09-30-2012, 03:19 PM

Thanks for the bump I'll be at swap meet sat all day selling my wears hope to see y'all there

rilynsdad · 09-30-2012, 09:49 PM

Quote:

Originally Posted by u&k metal works

Thanks for the bump I'll be at swap meet sat all day selling my wears hope to see y'all there

you all got t-shirts?

u&k metal works · 10-01-2012, 07:56 AM

Fresh out sorry

frankensteinxj · 10-01-2012, 10:41 PM

Ill be needing some tabs and misc crap while Im there to.

Bringin some decals?

I just sold my truck and the decal went with it. Your advertised in kentucky now

u&k metal works · 10-02-2012, 05:45 PM

Yep I'll have some decals

cmartin · 03-30-2013, 12:27 AM

Didnt know if you were still making parts?? Im building a new rig and will be needing tabs and maybe some other stuff. If so are you gonna be at iok swap meet this year too

JasperJeep · 09-12-2015, 11:27 AM

That Zack is a cutting machine. Ordered my battery box, quart and gallon carriers. Bad ass.

GT MOTORSPORTS · 10-27-2015, 10:36 AM

how clean accurate are the holes? I had some brackets cut from another place and the holes always need cleaned up with a drill.

11-16-2011, 12:12 AM	#1
u&k metal works Join Date: Oct 2011 Posts: 116	U&K metal works cnc plasma services Hey folks I'm now taking orders for all of your bracket and tab needs as well as DIY beadlocks and much more send me pm with questions and prices Attached Thumbnails

11-16-2011, 01:21 AM	#2
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	where are u located ? __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired

11-16-2011, 02:22 AM	#3
u&k metal works Join Date: Oct 2011 Posts: 116	Bainbridge Ohio about 19 miles east of Hillsboro Moderator Edit: Bainbridge OH, 45612 Last edited by WrenchMonkey; 11-17-2015 at 09:02 PM. Reason: Not ZIP 44023

11-16-2011, 04:28 PM	#4
u&k metal works Join Date: Oct 2011 Posts: 116	DIY beadlocks $200 for plain rings $225 for special order H1 rock rings $100 for a set of four. Get them just in time for Christmas Attached Thumbnails

11-28-2011, 02:33 PM	#5
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	bump for a good guy. ive had copperhead fab cnc products before and the kerf quality is nowhere near as smooth as u&k kerf. when i find some uncut h1 wheels ill be lookin for some rock rings from you zach. Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

11-30-2011, 04:33 PM	#6
u&k metal works Join Date: Oct 2011 Posts: 116	Some of the new work from the shop Attached Thumbnails

01-17-2012, 12:55 PM	#7
cheapthrills49 VANILLA GORILLA Join Date: Oct 2007 Location: blanmolester, ohio.......stonelick lake Posts: 192	Hey grilled cheese man, ;) do u have a program for H1 rings with 12 bolts or maybe half rounds __________________ I EAT BURRITOS ON EVERYTHING!!!!!!!!! Last edited by cheapthrills49; 01-19-2012 at 05:00 PM.

01-17-2012, 07:02 PM	#8
u&k metal works Join Date: Oct 2011 Posts: 116	I should if not I'll make one cheapthrill

02-11-2012, 06:24 PM	#9
u&k metal works Join Date: Oct 2011 Posts: 116	. Some new stuff coming out of the shop

02-12-2012, 11:46 AM	#10
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	What tonnage is your break that makes your spring plates? __________________

02-21-2012, 03:05 PM	#11
u&k metal works Join Date: Oct 2011 Posts: 116	I used a 20 ton press but have access to a 130 ton press what do you need bent??

04-03-2012, 07:57 AM	#12
cheapthrills49 VANILLA GORILLA Join Date: Oct 2007 Location: blanmolester, ohio.......stonelick lake Posts: 192	+1 for u & k metal works this thread needs a bump also.....zac does great work for deals!!!! This is just some of the business I have done with him, well this is just what I have of his here now. I have also built 3 other trucks with his parts, tabs, and custom brackets i may need.......I have had him cut tabs/brackets for 2 buggys/jeeps another buddy of mine has built as well as just backhalfing another jeep last week. he stays very busy and always comes through in the pinch, and is generaly always cheaper than any other tab co. out there and dont have to pay shipping and keep business local......well on that note its not so damn local lol but he works in mason and ships if you just cant work anything out. check out the big CTO hunks of 1/4"........custom panhard brackets Attached Thumbnails __________________ I EAT BURRITOS ON EVERYTHING!!!!!!!!!

04-03-2012, 08:08 AM	#13
cheapthrills49 VANILLA GORILLA Join Date: Oct 2007 Location: blanmolester, ohio.......stonelick lake Posts: 192	Flat bottom link tabs long flat bottom shock-c/o tab wrap around shock-c/o tab........NOTICE THE OFFSET HOLE SO THE SHOCK BODY CLEARS! short rad. Tabs...double sheer belt tabs Attached Thumbnails __________________ I EAT BURRITOS ON EVERYTHING!!!!!!!!!

04-03-2012, 08:16 AM	#14
cheapthrills49 VANILLA GORILLA Join Date: Oct 2007 Location: blanmolester, ohio.......stonelick lake Posts: 192	And dont forget your trick tic gussets!!!!!!!!!!!!!!!!! Attached Thumbnails __________________ I EAT BURRITOS ON EVERYTHING!!!!!!!!!

04-03-2012, 02:22 PM	#15
frankensteinxj Join Date: Jun 2009 Location: Goshen Posts: 336	Yo zach, gonna need about 10 of those small trucker tabs for my link brackets and my panhard and whatever else they may get used on. Also got a buddy that asked me if you could make a supersport SS emblem. If you can cut an emblem like that out he needs it mto say SS GRILL, He made a grill out of the front end of an el camino and needs a few emblems. Let me know what youcan do, thanks bud. __________________ BYAAH!!!

04-08-2012, 01:42 PM	#16
u&k metal works Join Date: Oct 2011 Posts: 116	Thanks for the feedback fellers and yep I'll be at the IOK swap meet selling my goods hope to see y'all there

09-27-2012, 08:13 AM	#17
cheapthrills49 VANILLA GORILLA Join Date: Oct 2007 Location: blanmolester, ohio.......stonelick lake Posts: 192	Figure I'd give this thread a BIRTHDAY BUMP HAPPY B-DAY ZAC !!!!! U running any b-day specials and what's your plan for the fall swap meet @ IOK? __________________ I EAT BURRITOS ON EVERYTHING!!!!!!!!!

09-30-2012, 03:19 PM	#18
u&k metal works Join Date: Oct 2011 Posts: 116	Thanks for the bump I'll be at swap meet sat all day selling my wears hope to see y'all there

10-01-2012, 07:56 AM	#20
u&k metal works Join Date: Oct 2011 Posts: 116	Fresh out sorry

10-01-2012, 10:41 PM	#21
frankensteinxj Join Date: Jun 2009 Location: Goshen Posts: 336	Ill be needing some tabs and misc crap while Im there to. Bringin some decals? I just sold my truck and the decal went with it. Your advertised in kentucky now __________________ BYAAH!!!

10-02-2012, 05:45 PM	#22
u&k metal works Join Date: Oct 2011 Posts: 116	Yep I'll have some decals

03-30-2013, 12:27 AM	#23
cmartin Join Date: Feb 2011 Location: miamisburg Posts: 191	Didnt know if you were still making parts?? Im building a new rig and will be needing tabs and maybe some other stuff. If so are you gonna be at iok swap meet this year too

09-12-2015, 11:27 AM	#24
JasperJeep Join Date: Sep 2014 Posts: 25	That Zack is a cutting machine. Ordered my battery box, quart and gallon carriers. Bad ass.

10-27-2015, 10:36 AM	#25
GT MOTORSPORTS Custom fabrication Join Date: May 2009 Location: Lynchburg,Ohio Posts: 92	how clean accurate are the holes? I had some brackets cut from another place and the holes always need cleaned up with a drill. __________________ Regret not what you've done,Only what you have'nt.