Heep help

yozuki · 03-23-2014, 11:01 PM

Bud of mine bought a 95 yj that point engage in 4x4 . Are these vacuum locking hubs or a vac switch some place that can be by passed. Any help would be great..

blazerbrad · 03-24-2014, 12:42 PM

There should be a vacuum disconnect on the passenger side front axle tube. If the t-case is engaging the front driveshaft, and low range works, but the front end doesn't pull look at this.

WrenchMonkey · 03-24-2014, 01:03 PM

Yep, you can just slide that shift collar over and lock it in place, should be good.

If you wanna fix it "right," I've got one-piece shafts out of an 02 TJ I'll trade you even.

(The 95 yj shafts are fairly rare, the only year and model to combine the vacuum disconnect and the bigger ujoints.)

Robert

Flint · 03-24-2014, 09:18 PM

Quote:

Originally Posted by WrenchMonkey

(The 95 yj shafts are fairly rare, the only year and model to combine the vacuum disconnect and the bigger ujoints.)

Robert

... and that, folks is why I like this forum. You can learn a few things from the knowledge base.

yozuki · 03-29-2014, 08:35 AM

Thanks for the info found the problem so he sold the jeep and bought a samurai. Shouldn't have any problems now. Lol

03-23-2014, 11:01 PM	#1
yozuki Join Date: Dec 2010 Location: EARTH Posts: 84	Heep help Bud of mine bought a 95 yj that point engage in 4x4 . Are these vacuum locking hubs or a vac switch some place that can be by passed. Any help would be great..

03-24-2014, 01:03 PM	#3
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Yep, you can just slide that shift collar over and lock it in place, should be good. If you wanna fix it "right," I've got one-piece shafts out of an 02 TJ I'll trade you even. (The 95 yj shafts are fairly rare, the only year and model to combine the vacuum disconnect and the bigger ujoints.) Robert __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

03-29-2014, 08:35 AM	#5
yozuki Join Date: Dec 2010 Location: EARTH Posts: 84	heep Thanks for the info found the problem so he sold the jeep and bought a samurai. Shouldn't have any problems now. Lol

03-24-2014, 12:42 PM	#2
blazerbrad - CORE Member - Join Date: Feb 2007 Posts: 831 Images: 6	There should be a vacuum disconnect on the passenger side front axle tube. If the t-case is engaging the front driveshaft, and low range works, but the front end doesn't pull look at this.