Oklahoma buggy build

oklahomawelder · 12-11-2010, 10:32 AM

Thought I would post up some progress on my Yellowjacket Fab buggy slowly going together....
I will be running:
Motor: LS6
Trans: TH400
Tcase: Atlas 4.3
Axles: 60 FR & Rr
Gears: 5.13 detroit Fr&Rr
Suspensioin: 2.0 Fox 18" shocks 4-link Fr&Rr
Tires: undecided in 39"-40" flavor
Seats: Racetrim suspension seats
Steering: PSC full hydro

yellowjacket · 12-11-2010, 11:50 AM

lookin good. some of the pics are grainy- when that rear truss is done id like to see some close ups on that! are you leaving the belly as is or moving it around any?

oklahomawelder · 12-11-2010, 07:55 PM

I hope to leave the belly as is. I have noticed I will more than likely have to run a 2 pc front drive shaft and may end up having to move the front tube on that side of the belly, but not sure just yet....
After CHRISTMAS, (NOT HOLIDAY) I should be able to proceed pretty quickly. Shocks should be here next week, order some tube from RED 9, order my 6x3x1/4 rect tube for the trusses, 8 more 7/8" rod ends from Ruffstuff and get it in roller form and take it to my sheet metal guy to help with the firewall, floors and all....

oklahomawelder · 01-09-2011, 10:15 PM

Got all the links made and tacked in along with front and rear shocks and front and rear trusses. Tranny mount and some tube work in the rear also...

simpletoy · 01-09-2011, 11:13 PM

Looks good man can't wait to see the finished product.

oklahomawelder · 01-10-2011, 11:45 PM

Quote:

Originally Posted by simpletoy

Looks good man can't wait to see the finished product.

Thanks... I am hoping to finish up within the next 2-3 months...

12-11-2010, 10:32 AM	#1
oklahomawelder Tradin' Fool Join Date: Nov 2010 Location: Oklahoma Posts: 86	Oklahoma buggy build Thought I would post up some progress on my Yellowjacket Fab buggy slowly going together.... I will be running: Motor: LS6 Trans: TH400 Tcase: Atlas 4.3 Axles: 60 FR & Rr Gears: 5.13 detroit Fr&Rr Suspensioin: 2.0 Fox 18" shocks 4-link Fr&Rr Tires: undecided in 39"-40" flavor Seats: Racetrim suspension seats Steering: PSC full hydro Attached Thumbnails

12-11-2010, 11:50 AM	#2
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	lookin good. some of the pics are grainy- when that rear truss is done id like to see some close ups on that! are you leaving the belly as is or moving it around any? __________________ my next rig will be on the trail before zuk 2.0 will

01-09-2011, 10:15 PM	#4
oklahomawelder Tradin' Fool Join Date: Nov 2010 Location: Oklahoma Posts: 86	Got all the links made and tacked in along with front and rear shocks and front and rear trusses. Tranny mount and some tube work in the rear also... Attached Thumbnails

12-11-2010, 07:55 PM	#3
oklahomawelder Tradin' Fool Join Date: Nov 2010 Location: Oklahoma Posts: 86	I hope to leave the belly as is. I have noticed I will more than likely have to run a 2 pc front drive shaft and may end up having to move the front tube on that side of the belly, but not sure just yet.... After CHRISTMAS, (NOT HOLIDAY) I should be able to proceed pretty quickly. Shocks should be here next week, order some tube from RED 9, order my 6x3x1/4 rect tube for the trusses, 8 more 7/8" rod ends from Ruffstuff and get it in roller form and take it to my sheet metal guy to help with the firewall, floors and all....

01-09-2011, 11:13 PM	#5
simpletoy Join Date: Nov 2010 Location: Independence, Ky Posts: 119	Looks good man can't wait to see the finished product.